How do I clean out the fluid in the torque converter?

If you can't find thinner fluid use a few drops of water or non-acetone nail polish instead.

If this happens, you probably put too much correction fluid over the error. If your layers are too thick the area will be textured and difficult to write on. When...

You should never lose brake fluid unless you have a leak in the system, which should be corrected before you drive the vehicle again.

Gently hit your starter with a hammer or other blunt object to loosen it. You can give the starter, which is located on the motor, a light tap with a...

Yes.

I assume the above pictures are for illustration only. When doing this you can leave the brake lines attached. You don't need to disassemble the lines or mess with the...

You can just wipe it down with a rag. If the cleaning fluid actually isn't coming out, try poking the opening with a pin or staple. Gunk occasionally gets trapped...

Yes, it is.

I also bought my lanterns from China, and ignited the square blocks. They worked beautifully. Use a long lighter for best results, and hold the flame on the top of...

In step 2 of the firing procedure, they were saying: pour 2.5 ml of fluid into a teaspoon and repeat/put the fluid into a teaspoon 2 times.