To ensure that the hogging bending moment at two points of suspension of a pile of length L equals the sagging moment at its centre, the distances of the points of suspension from either end, is?

0.107 L
0.207 L
0.307 L
0.407 L

LohaHridoy

6 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 2

6 views Answered 2022-09-01 13:21

Related Questions

The bending moment ‘M’ and a torque ‘T’ is applied on a solid circular shaft. If the maximum bending stress equals to maximum shear stress developed, then ‘M’ is equal to?

1 Answers 5 Views

The bending moment of a cantilever beam of length $$l$$ and carrying a gradually varying load from zero at free end and w per unit length at the fixed end is ________ at the fixed end.?

1 Answers 6 Views

The bending moment at a section tends to bend or deflect the beam and the internal stresses resist its bending. The resistance offered by the internal stresses, to the bending, is called?

1 Answers 5 Views

A shaft of diameter D is subjected to a twisting moment (T) and a bending moment (M). If the maximum bending stress is equal to maximum shear stress developed, then M is equal to?

1 Answers 4 Views

A cantilever of length ‘L’ is subjected to a bending moment ‘M’ at its free end. If EI is the flexural rigidity of the section, the deflection of the free end, is?

1 Answers 8 Views

In a combined footing for two columns carrying unequal loads, the maximum hogging bending moment occurs at?

1 Answers 7 Views

If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span of a square flat slab, should not be less than?

1 Answers 5 Views

A pile of length ‘L’ carrying a uniformly distributed load ‘W’ per metre length is suspended at two points, the maximum, B.M. at the centre of the pile or at the points of suspension, is?

1 Answers 5 Views

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed?

1 Answers 5 Views

If the length of a wall on either side of a lintel opening is at least half of its effective span L, the load W carried by the lintel is equivalent to the weight of brickwork contained in an equilateral triangle, producing a maximum bending moment?

1 Answers 11 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)