If W is total load per unit area on a panel, D is the diameter of the column head, L is the span in two directions, then the sum of the maximum positive bending moment and average of the negative bending moment for the design of the span of a square flat slab, should not be less than?

WL/12 (L - 2D/3)²
WL/10 (L + 2D/3)²
WL/10 (L - 2D/3)²
WL/12 (L - D/3)²

LohaHridoy

5 views

2025-01-04 04:42

1 Answers

AhmedNazir

Answer: Option 3

5 views Answered 2022-09-01 13:21

Related Questions

In counterfort type retaining wallsi) the vertical slab is designed as a continuous slabii) the heel slab is designed as a continuous slabiii) the vertical slab is designed as a cantileveriv) the heel slab is designed as a cantileverThe correct answer is?

1 Answers 6 Views

Sinking of an intermediate support of a continuous beami) reduces the negative moment at supportii) increases the negative moment at supportiii) reduces the positive moment at center of spaniv) increases the positive moment at center of span The correct answer is?

1 Answers 4 Views

A shaft of diameter D is subjected to a twisting moment (T) and a bending moment (M). If the maximum bending stress is equal to maximum shear stress developed, then M is equal to?

1 Answers 4 Views

If the sides of a slab simply supported on edges and spanning in two directions are equal, the maximum bending moment is multiplied by?

1 Answers 4 Views

If ‘W’ is the load on a circular slab of radius ‘R’, the maximum radial moment at the centre of the slab, is?

1 Answers 5 Views

If W is the load on a circular slab of radius R, the maximum circumferential moment at the centre of the slab, is?

1 Answers 7 Views

The diameter of the column head support a flat slab, is generally kept?

1 Answers 6 Views

If K is a constant depending upon the ratio of the width of the slab to its effective span l, x is the distance of the concentrated load from the nearer support, bw is the width of the area of contact of the concentrated load measured parallel to the supported edge, the effective width of the slab be is?

1 Answers 5 Views

For a circular slab carrying a uniformly distributed load, the ratio of the maximum negative to maximum positive radial moment, is?

1 Answers 5 Views

In testing a pile by load test, pile platform is loaded with one and half times the design load and a maximum settlement is noted. The load is gradually removed and the consequent rebound is measured. For a safe pile, the net settlement (i.e. total settlement minus rebound) per tonne of test load should not exceed?

1 Answers 5 Views

এক্সাম দিয়ে মেধা যাচাই করুন

Job Preparation (1125)

Admission (754)

এসএসসি (10)

এইচএসসি (5)