How do I meet carpet to wood flooring without any kind of transition strip?

Md Ariful Islam

0 like 0 dislike
1 views
Share with your friends

1 Answers

Dr. Md Rushad Rahman

Call

You'll have to either staple or glue the carpet down or use Tackless Strips to affix the carpet properly. You'll want to roll or fold the edge so a vacuum doesn't pull out the carpet from the edge. The roll or fold will be your padding there, so don't put padding under the edge.

173 like 0 dislike
1 views
Talk Doctor Online in Bissoy App
After using transfer paper onto wood is there a way to remove the markings from the wood? I messed up and need to remove what I traced?

You could use nail polish remover. Just dab it in a cloth and rub it gently on the surface to remove the markings.

2 Answers 1 views
I have some nicely dried wood from a pear tree I cut down last year. Will this make a good smoking wood?

Yes, if you allow it to dry all the way. Moist wood is to hard to use, but dry wood can be used.

2 Answers 1 views
What type of wood works best for making custom wood signs?

For outdoor use, I recommend using Douglas fir or vertical grain Douglas fir. These woods hold up very well in outdoor conditions over time. For indoor signs, good choices are...

2 Answers 1 views
What type of wood is used for the frame? Is it 2 inch square wood?

When people say 2 by 4, the wood is actually 1 and a half inches by 3 and a half inches. When you go to purchase the wood you can...

2 Answers 1 views
How do you cover tile floors with carpet or laminate flooring?

If you're going to put carpet down, you would put a pad over the tile first, and then the carpet would go over that. If you were going to put...

2 Answers 1 views
If I glue the plexiglass to the wood strip first, will that keep it from breaking when I drill it?

The trick is to go slowly, use a good sharp bit, and ensure that the section of material you are drilling is supported and will not bend, twist, or otherwise...

2 Answers 1 views
Should I be concerned about wood splitting at a later date when using soft wood?

Not overly.

2 Answers 1 views
How can I get silly putty out of my carpet without carpet cleaner?

Place a bag or towel of ice on top of the silly putty until it's hard and brittle. Then, you can chip it away from the fabric.

2 Answers 1 views
Is it possible to own a plane without owning an air strip?

Yes, you can hanger it or tie it down at a nearby airport.

2 Answers 1 views
How do you lighten a wood stain without sanding the wood?

Use a furniture refinisher to dissolve the stain and scrub it away with a bit of steel wool. Although it still involves some scrubbing, this approach is less damaging to...

2 Answers 1 views
X