Login
Get Advice on Live Video Call
Earn $ Cash $ with
consultations on Bissoy App

Which command will display all the EIGRP feasible successor routes known to a router?

LohaHridoy
  1. show ip routes *
  2. show ip eigrp summary
  3. show ip eigrp topology
  4. show ip eigrp adjacencies

0 like 0 dislike
1 views
Share with your friends

1 Answers

AhmedNazir

Call

Answer: Option 3

Any secondary route to a remote network is considered a feasible successor, and those routes are only found in the topology table and used as backup routes in case of primary route failure. You can see the topology table with the show ip eigrp topology command.

0 like 0 dislike
1 views
A motorist knows four different routes from Bristol to Birmingham. From Birmingham to Sheffield he knows three different routes and from Sheffield to Carlisle he knows two different routes. How many routes does he know from Bristol to Carlisle ?

Answer: Option 4 Total number of routes from Bristol to Carlisle = (4 x 3 x 2) = 24.

1 Answers 1 views
You save the configuration on a router with the copy running-config startup-config command and reboot the router. The router, however, comes up with a blank configuration. What can the problem be?

Answer: Option 3 If you save a configuration and reload the router and it comes up either in setup mode or as a blank configuration, chances are you have the...

1 Answers 1 views
What command do you use to add routes to a Linux router?

Answer: Option 2 Let'

1 Answers 1 views
What happens if the following program is compiled and executed interface MyInterface{ void display(); } interface MySubInterface extends MyInterface{ void display(); } public class Test implements MySubInterface{ public void display(){ System.out.print("Welcome to Examveda."); } public static void main(String args[]){ Test t = new Test(); t.display(); } }?

Answer: Option 3 The program will compile and execute successfully as you can declare methods with same name in an interface and the method of either interface can be used,...

1 Answers 1 views
You need to find the broadcast address used on a LAN on your router. What command will you type into the router from user mode to find the broadcast address?

Answer: Option 3 The command show ip protocols will actually show you the broadcast address for each interface - too bad it isn't a possible answer. Your best answer is...

1 Answers 1 views
The corporate office sends you a new router to connect, but upon connecting the console cable, you see that there is already a configuration on the router. What should be done before a new configuration is entered in the router?

Answer: Option 3 Before you start to configure the router, you should erase the NVRAM with the erase startup-config command and then reload the router using the reload command.

1 Answers 1 views
A network administrator wants to upgrade the IOS of a router without removing the image currently installed. What command will display the amount of memory consumed by the current IOS image and indicate whether there is enough room available to hold both the current and new images?

Answer: Option 2 The show flash command will provide you with the current IOS name and size and the size of flash memory.

1 Answers 5 views
You need the IP address of the devices with which the router has established an adjacency. Also, the retransmit interval and the queue counts for the adjacent routers need to be checked. What command will display the required information?

Answer: Option 4 The show ip eigrp neighbors command allows you to check the IP addresses as well as the retransmit interval and queue counts for the neighbors that have...

1 Answers 1 views
Where are EIGRP successor routes stored?

Answer: Option 4 Successor routes are going to be in the routing table since they are the best path to a remote network. However, the topology table has a link...

1 Answers 1 views
You need to configure a router for a Frame Relay connection to a non-Cisco router. Which of the following commands will prepare the WAN interface of the router for this connection?

Answer: Option 3 If you have a Cisco router on one side of a Frame Relay network and a non-Cisco router on the other side, you would need to use...

1 Answers 1 views

Log in to ask questions, provide answers, or leave comments.


Login

Install the Bissoy app to consult with a doctor.


Download