- r (π - 0.75)/(π - 0.5)
- r (π - 0.25)/(π - 0.75)
- r (π - 0.5)/(π - 0.75)
- r (π - 0.5)/(π - 0.25)
1 Answers
Call
Talk Doctor Online in Bissoy App
If there is a circular hole in a metal plate, what happens to the radius of the hole when the plate is heated?
Answer: Option 1 When a metal plate with a circular hole at its centre is heated, definitely along with the areal expansion of the plate the diameter of the circular...
1 Answers 1 views
The retardation of a flat faced follower when it has contact at the apex of the nose of a circular arc cam, is given by (where OQ = Distance between the centre of circular flank and centre of nose)?
Answer: Option 1 Let'
1 Answers 2 views
The periodic time of a compound pendulum is __________ when the distance between the point of suspension and the center of gravity is equal to the radius of gyration of the body about its center of gravity.?
Answer: Option 2 Let'
1 Answers 1 views
When a hole of diameter ‘d’ is punched in a metal of thickness 't', then the force required to punch a hole is equal to (where $${\tau _{\text{u}}}$$ = Ultimate shear strength of the material of the plate)?
Answer: Option 2 Let'
1 Answers 2 views
The centre of gravity of the trapezium as shown in below figure from the side is at a distance of?
Answer: Option 1 Let'
1 Answers 1 views
A metal plate with a circular hole at the centre is heated. What will happen to the area of the hole ?
Answer: Option 1 Assuming the disc is uniform and isotropic (the same in different directions), the hole will expand in the same ratio as the metal. It is because the...
1 Answers 1 views
A plate with an elliptical hole in the centre, with semi-major axis (a) perpendicular to the direction of loading and semi-minor axis (b) along the direction of loading, is subjected to a pull P. The maximum stress induced at the edge of the hole is equal to (where $$\sigma $$ = Stress for a plate with no hole i.e. nominal stress)?
Answer: Option 2 Let'
1 Answers 1 views
In order to avoid tearing of the plate at an edge, the distance from the centre line of the rivet hole to the nearest edge of the plate should be equal to (where d = Diameter of rivet hole)?
Answer: Option 2 Let'
1 Answers 1 views
The centre of gravity of a right circular solid cone is at a distance of _________ from its base, measured along the vertical axis. (where h = Height of a right circular solid cone.)?
Answer: Option 3 Let'
1 Answers 1 views
The depth of centre of pressure (h) for a vertically immersed surface from the liquid surface is given by (where IG = Moment of inertia of the immersed surface about horizontal axis through its centre of gravity, A = Area of immersed surface, and x = Depth of centre of gravity of the immersed surface from the liquid surface)?
Answer: Option 4 Let'
1 Answers 1 views