Bissoy.com
Doctors Medicines MCQs Q&A

What is the total memory range and memory map, if for a 16-bit address bus; A15 = 1, A14 = 0, and A13 – A11 are connected to enable decoder input lines? A15, and A14, are connected to enable the decoder.

What is the total memory range and memory map, if for a 16-bit address bus; A15 = 1, A14 = 0, and A13 – A11 are connected to enable decoder input lines? A15, and A14, are connected to enable the decoder. Correct Answer 16K, 8000H — BFFFH

[ alt="F16 Shubham 30-11-2020 Swati D19" src="//storage.googleapis.com/tb-img/production/20/11/F16_Shubham_30-11-2020_Swati_D19.png" style="width: 780px; height: 95px;">

∴ The memory map is H (8000)H to (BFFF)H with memory range 16k.

Related Questions

A Windows 2000 Server computer named server2 runs numerous 32bit applications and two 16bit applications. Users start the 16bit applications by running APP1.EXE for one application and APP2.EXE for another application. The 16bit applications are configured to run in the separate memory space. You want to create a performance base like chart in the system monitor for all the applications on server2. You add all of 32bit applications and now you want to add two 16bit applications. What should you do?
Each of the question below consists of a question and three statements number I, II and III given below it. You have to decide whether the data provided in the statement are sufficient to answer the question. If the bus is travelling from Surat to Ahmadabad and a car is travelling from Ahmadabad to Surat, then what is the distance between Surat and Ahmadabad? I. The speed of a car is 40% less than the speed of bus. Bus started at 9 am and car started at 10 am and they meet at 3 pm of the same day. II. After travelling for 1 hour, because of traffic average speed of bus is decreased by 20% and covers distance between Surat to Ahmadabad in 11 hours. Original speed of car is 20% less than original speed of bus and before crossing bus it covered 200 km if starts 1 hour later than bus. After crossing car, bus covers remaining distance in 5 hours. III. Speed of bus is 10 km/hr more than the speed of car and before crossing car ratio of distances covered bus and car in same time was 5 : 4. Time taken by car to cover the distance between Ahmadabad and Surat is 2 hours 15 minutes more than time taken by bus to cover the same distance.
A stationery seller has a highlighter pen, a country map, and a world map. The cost of a highlighter pen is Rs. 96. If he sells a pen with a country map, he receives the amount twice the value of the world map. And if he sells a pen with the world map, he receives an amount that is less than the value of the country map by Rs. 210. What is the value of the world map?
The chip select logic for a certain DRAM chip in a memory system design is shown below. Assume that the memory system has 16 address lines denoted by A15 to A0. What is the range of addresses (in hexadecimal) of the memory system that can get enabled by the chip select (CS) signal?
A bus and a truck are available to cross a jungle. The speed of the truck is thrice that of the bus. The capacity of the truck is 50 persons and that of bus is 30 persons. The average occupancy of the bus is twice that of the truck. The tickets for the bus and the truck cost Rs 1 and Rs 1.50 respectively. What is the ratio of the average rupee collection of the truck to that of the bus in a day? Assume there is no wastage time between trips and the occupancy of the bus / truck is defined as the ratio of the actual number of persons boarding it and its capacity.
The statement concern psychrometric chart. 1. Constant relative humidity lines are uphill straight lines to the right 2. Constant wet bulb temperature lines are downhill straight lines to the right. 3. Constant specific volume lines are downhill straight lines to the right. 4. Constant enthalpy lines are coincident with constant wet bulb temperature lines. Which of the statements are correct?
A 1 to 8 demultiplexer with data input Din, address inputs S0, S1, and S2, (with S0  as the LSB) and Y̅0 to Y̅ 7 as the eight de-multiplexed output, is to be designed using two 2 to 4 decoders (with enable input E and address input A0 and A1) as shown in the figure. Din, S0, S1, and S2 are to be connected to P, Q, R, and S but not necessarily in this order. The respective input connections to P, Q, R, and S terminals should be
On a non-pipelined sequential processor, a program segment, which is a part of the interrupt service routine, is given to transfer 500 bytes from an I/O device to memory.     Initialize the address register     Initialize the count to 500 LOOP: Load a byte from device     Store in memory at address given by address register     Increment the address register     Decrement the count     If count! = 0 go to LOOP Assume that each statement in this program is equivalent to a machine instruction which takes one clock cycle to execute if it is a non-load/store instruction. The load-store instructions take two clock cycles to execute. The designer of the system also has an alternate approach of using the DMA controller to implement the same transfer. The DMA controller requires 20 clock cycles for initialization and other overheads. Each DMA transfer cycle takes two clock cycles to transfer one byte of data from the device to the memory. What is the approximate speedup when the DMA controller based design is used in place of the interrupt driven program based input-output?
A 8-bit DAC is interfaced with a microprocessor having 16 address lines (A0 …. A15) as shown in the adjoining figure. A possible valid address for this DAC is
Which of the following statements is/are correct? 1. An address generated by the CPU is commonly referred to as a physical address. 2. An address seen by the memory unit is commonly referred to as a logical address. 3. The run-time mapping from virtual to physical address is done by the memory management unit (MMU). Select the correct answer using the code given below.