Bissoy.com
Doctors Medicines MCQs Q&A

A machined surface with standard symbols indicating the surface texture is shown in the figure. (All dimensions in the figure are in micrometre). The waviness height (in micrometre) of the surface is

A machined surface with standard symbols indicating the surface texture is shown in the figure. (All dimensions in the figure are in micrometre). The waviness height (in micrometre) of the surface is Correct Answer 50

Explanation:

Surface texture is the degree of finish conveyed to the machinist by a system of symbols devised by a Standards Association. These symbols provide a standard system of determining and indicating the surface finish.

[ alt="RRB JE ME 57 15Q Metrology CH 1 Hindi - Final Diag(Deepak) images Q11" src="//storage.googleapis.com/tb-img/production/19/07/RRB_JE_ME_57_15Q_Metrology_CH_1_Hindi%20-%20Final_Diag%28Deepak%29_images_Q11.PNG">

Surface terms:

Flaws: Flaws are random irregularities or scratches, holes depression, seams, tear, or inclusions. These are defects caused during the machining operation.

Lay: It is the direction of the surface pattern caused by the machining and is visible to the naked eye.

Roughness: Roughness is the irregular deviation of the surface.

Roughness height: Roughness height, Ra is the deviation of the centre line.

Roughness width: Roughness width is the distance between successive roughness peaks parallel to the nominal surface.

Waviness: Waviness is the recurrent deviation form a flat surface, it is measured and described in terms of the surface between adjacent crests of the waves (waviness width) and height between the crests and valleys of the waves (waviness height).

Standard symbol to represent surface texture:

Specifications

Marking

Placement of maximum roughness width rating to right of the lay symbol

[ alt="F1 M.J 9.5.20 Pallavi D6" src="//storage.googleapis.com/tb-img/production/20/05/F1_M.J_9.5.20_Pallavi_D6.png" style="width: 127px; height: 80px;">

Placement of roughness width cut-off

[ alt="F1 M.J 9.5.20 Pallavi D7" src="//storage.googleapis.com/tb-img/production/20/05/F1_M.J_9.5.20_Pallavi_D7.png" style="width: 127px; height: 46px;">

Placement of minimum value roughness height

[ alt="F1 M.J 9.5.20 Pallavi D8" src="//storage.googleapis.com/tb-img/production/20/05/F1_M.J_9.5.20_Pallavi_D8.png" style="width: 129px; height: 49px;">

Placement of maximum value of roughness height

[ alt="F1 M.J 9.5.20 Pallavi D9" src="//storage.googleapis.com/tb-img/production/20/05/F1_M.J_9.5.20_Pallavi_D9.png" style="width: 131px; height: 46px;">

Placement of maximum waviness height and

The maximum waviness width value

[ alt="F1 M.J 9.5.20 Pallavi D10" src="//storage.googleapis.com/tb-img/production/20/05/F1_M.J_9.5.20_Pallavi_D10.png" style="width: 133px; height: 102px;">

Related Questions

The figure below shows a symbolic representation of the surface texture in a perpendicular lay orientation with indicative values (I through VI) marking the various specifications whose definitions are listed below. P: Maximum Waviness Height (mm); Q: Maximum Roughness Height (mm); R: Minimum Roughness Height (mm); S: Maximum Waviness Width (mm); T: Maximum Roughness Width (mm); U: Roughness Width Cutoff (mm); The correct match between the specifications and the symbols (I to VI) is
A company recruits candidates satisfying the following criteria -  1. Candidates who secured at least 85% in standard 10th or equivalent. 2. Candidates who secured at least 65% in standard 12th or equivalent. 3. Candidates who are not from commerce background. Who among the following candidates will the company definitely select? A. Jitesh is a science student having scored 70% in standard 12th and 80% in 10th with an excellent sports background. B. Jignesh scored 80% in standard 12th, 90% in standard 10th and secured 2nd place in his college among all commerce students. C. Jayesh scored 75% in standard 10th, 75% in standard 12th and is an arts student. D. Jinesh secured 80% in standard 12th, 88% in standard 10th and is a science student with great acting skills
“What is the different between height and radius of solid cylinder?” Which of the following option is sufficient alone to find the answer? A) A solid cylinder is made by melting a solid sphere. The radius of cylinder is 3 times the radius of a circle whose area is 154 sq.m. Height of cylinder is equal to the height of cone whose volume is 2772 cubic meters. B) Area of a rectangle whose longer side is ¾ times the radius of a solid cylinder, is 168 sq.m and, Volume of solid cylinder is 2772 cubic meters and its height is 18 m. C) A metallic cone of radius 15m and height 35m is melted into the solid cylinder of radius equal to the radius of a circle whose area is equal to the area of rectangle whose sides are in the ratio 4 : 3 respectively. D) The curved surface area of the solid cylinder is 3 time the surface area of a sphere of radius 7m and height of cylinder is equal to the height of a metallic cone whose curved surface area is 308 sq.m. 
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of thefour alternatives.
That is why publicly invoking these symbols has to be an act of responsible citizenship and not self­____________ demagoguery, but thedifference can be hard to _______________. The problem with emotive symbols is that _________________ they can multiply the force ofarguments, they cannot replace the arguments__________________. All persuasion harnesses symbols but principled persuasion must alsoprovide arguments that can be _____________ debated. The problem with emotive symbols is that _________________ they can multiply the force of arguments,
The given table shows the number of students and their class. Division A students are scholars who get a 25% rebate in fees. In addition, all girls students get 40% subsidy. If the fee per student a year WITHOUT rebate or subsidy is Rs. 10,000, then find the total fees collected from the students of these 6 classes for that year. Division  /Standard  Boys Girls Division A /Standard 9 20 40 Division B /Standard 9 40 35 Division C /Standard 10 20 20 Division A /Standard 10 40 20 Division B /Standard 10 20 40 Division C /Standard 10 20 15
The average of the height of the 20 employee of the company is 1.5 m.In the month of June, two employees named Rita and Sumit left the company whose height are 1.4 m and 1.6 m respectively. In August, two more people left the company whose average of height is 1.7 m and one person join the company whose height is 87.5% of height of Sumit. Before the December, more four people left the company whose height are 1.3 m, 1.1 m, 1.32 m and 1.25 m respectively and more 5 people join the company whose height are 1.26 m, 1.18 m, 1.39 m and 1.4 m respectively. The average of height in the month of September is ….
Refer the below data table and answer the following Question : Division/Standard Boys Girls Division A/Standard 5 20 30 Division B/Standard 5 15 20 Division C/Standard 5 30 10 Division A/Standard 6 30 25 Division B/Standard 6 30 25 Division C/Standard 6 30 20   What is the ratio of Boy’s to Girl’s? 
 There are seven persons A, B, C, D, E, F and G. Each has a different height. The height of only two persons is more than that of D. The height of B is more than that of C and F. The height of E is more than that of G. The height of A is less than that of D, but more than that of B. Height of F is not the least. Which of the following options regarding their height is correct?
Height of 8 boys B1, B2, B3, B4, B5, B6, B7, and B8 are compared. Height of B3 will be the least or maximum. Height of B4 is more than B6. Height of B8 is less than only 3 boys. Height of B2 is more than B1 but less than B8. Height of B2 is less than B3. If the height of B4 is less than B1, then which of the following sequence of their heights may be correct?
The height of a tree is defined as the number of edges on the longest path in the tree. The function shown in the pseudocode below is invoked as height(root) to compute the height of a binary tree rooted at the tree pointer root. int height (treeptr n) { if (n == NULL) return -1;   if (n →  left == NULL)        if (n →  right == NULL) return 0;        else return ; \(\boxed{B1}\);     // Box 1 else { h1 = height (n →  left);          if (n → right == NULL) return (1+h1);          else { h2 = height (n → right);          return ; \(\boxed{B2}\)   // Box 2                        }            } } The appropriate expressions for the two boxes B1 and B2 are