Bissoy.com
Doctors Medicines MCQs Q&A

The raft foundations are generally used when the required area of footing is

The raft foundations are generally used when the required area of footing is Correct Answer more than one-half

Explanation:

Raft Foundation:

A raft foundation is generally a thick concrete slab resting on a large area of soil reinforced with steel rods and is used to support columns or walls and transfer loads from the structure to the soil.

Raft foundation may be used under the following conditions:

  • The soil has a low bearing capacity.
  • The load of the structure has to be distributed over a large area
  • Individual or any other foundation area would approximately cover 50% of the total ground area beneath the structure.
  • The columns or walls are placed so closely that the individual footings would overlap.
  • Stress on soil needs to be reduced.
  • There is a possibility of differential settlement in case individual footing is used.
  • When soil strata are unpredictable and contain pockets of compressible soil.
  • The basement is to be constructed.
  • Any other type of footing cannot be used advantageously.

Related Questions

Consider the following statements: 1. According to Terzaghi’s, a foundation is shallow if its depth is equal to or less than its width. 2. Spread footing, strap footing and raft footing are types of shallow foundations. 3. Combined footing may be trapezoidal if the two columns carry unequal loads; and rectangular if both columns carry equal loads. 4. For water tanks, providing raft foundations will avoid unequal settlements. Which of the above statements are correct?
In raft footing, if the C.G of the load coincide with the centroid of the raft, the upward load is considered as ___________
Raft foundation are generally preferred to when the area required for individual footing, is more than
If q is the punching shear resistance per unit area a, is the side of a square footing for a column of side b, carrying a weight W including the weight of the footing, the depth (D) of the footing from punching shear consideration, is
Match the conditions under which the given type of footing is used:  a. Combined footing  I. For two or more columns  b. Mat foundation  II. For isolated or group of  columns  c. Pile foundation  III. For individual column  d. Isolated footing  IV. For supporting all  columns of structure
Raft foundation are generally preferred to when they are required for individual footing, is more than:
Raft foundations are used for:
A suit, a trouser, and a shirt are to be stitched from a cloth. The cloth required for the suit is the average of cloth required for trousers and shirt. The length of the cloth for suit is 1.5 times the cloth required for the shirt. The length of cloth required for shirt is 5 times the even prime number. Which of the following is/are correct? A. Cloth required for trousers is 20 m B. Average length of cloth required for all the dresses = Cloth required for suit C. Initially, the cloth was 45 m D. Cloth required for shirt is 15 m
For a proposed building, raft foundation, isolated footings and combined footings are being considered. These foundations are to be listed in the decreasing order of preference in terms of performance. Which one of the following is the correct order of listing?
If the wall or column under construction is near some other property, it will not be possible to spread the footing to both the sides of War or column. In search case which footing is used?