Bissoy.com
Doctors Medicines MCQs Q&A

In the SMPS regulator is accompanied by:

In the SMPS regulator is accompanied by: Correct Answer Duty cycle control

SMPS regulator converts unregulated DC input voltage to a regulated and smooth DC output voltage at different voltage levels.

In the SMPS regulator is accompanied by duty cycle control.

By varying the duty cycle, the output voltage can be controlled.

Related Questions

Consider the following statements. 1. SMPS generates both electromagnetic and radio frequency interference due to high switching frequency. 2. SMPS has a high ripple in output voltage and its regulation is poor. 3. The output voltage of SMPS is less sensitive with respect to input voltage variation. Which of the above statements are correct?
What are the conditions to be satisfied by a voltage source for using it in switching regulator. i. It must supply the required output power and the losses associated with the switching regulator ii. It must be large enough to supply sufficient dynamic range line and load variations iii. It must be sufficient high to meet the minimum requirement of the regulator system to be designed iv. It may be required to store energy for a specified amount of time during power failure especially if the system is designed for a computer power supply.
According to Naiya̅yikas we ascertain the relation of universal concomitance between x and y :  (A) We can determine the relation only if we can determine the relation of essential identity between x and y   (B) By perceiving that in all cases the presence of x is accompanied by the presence of y  (C) We can determine the relation only if we can determine the relation of cause and effect between x and y  (D) By not perceiving any instance where the presence of x is not accompanied by the presence of y or vice-versa.  Choose the correct answer from the options given below : 
A Zener voltage regulator will cease to act as a voltage regulator if Zener current becomes ___________
A designer requires a shunt regulator of approximately 20 V. Two kinds of Zener diodes are available: 6.8-V devices with rz of 10 Ω and 5.1-V devices with rz of 30 Ω. For the two major choices possible, find the load regulation. In this calculation neglect the effect of the regulator resistance R.
A transistor series regulator has the following specifications: VIN=15V, VZ=8.3V, β=100, R=1.8KΩ, RL=2KΩ. What will be the Zener current in the regulator circuit?
How many numbers of conditions of flow are to be followed while designing the cross regulator and head regulator?
In a coal mine district, air flows at a rate of 30 m3/s at a pressure of 1200 Pa. The density of air is 1.2 kg/m3. The mine management decided to reduce the flow rate of air to 20 m3/s using a regulator without changing the ventilation pressure. The area of regulator expressed in m2 will be
A fan circulates 24 m3/s of air at a pressure of 1200 Pa in a ventilation district. It is intended to reduce the air quantity to 16 m3/s by placing a regulator. Assuming the pressure remains unchanged, the size of the regulator in m2 is
Two splits A and B are ventilated from an intake airway. Resistances of the splits are 0.5 Ns2m-8 and 0.8 Ns2m-8 respectively. A regulator is placed in split B to maintain a flow of 15 m3/s and 10 m3/s in splits A and B respectively as shown in the figure. The size of the regulator in m2 is
Mine Ventilation mcq question image