Bissoy.com
Doctors Medicines MCQs Q&A

For a silicon diode, the value of the forward bias voltage typically:

For a silicon diode, the value of the forward bias voltage typically: Correct Answer must be greater than 0.7 V.

  • For silicon diode, the built-in potential difference is typically of the order of 0.7 V
  • For Germanium diode the built-in potential difference is 0.3 V
  • For a Normal p-n junction the concentration of electron and holes are same and hence there are no majority carriers, option 4 cannot be true

Related Questions

Which of the following conditions must be satisfied for a transistor to be in saturation? 1. Its collector to base junction should be under forward bias 2. Its collector to base junction should be under reverse bias 3. Its emitter to base junction should be under reverse bias 4. Its emitter to base junction should be under forward bias Which of the above conditions are correct?
If CT is the transition capacitance, which of the following are true? 1) in forward bias, CT dominates 2) in reverse bias, CT dominates 3) in forward bias, diffusion capacitance dominates 4) in reverse bias, diffusion capacitance dominates
Calculate the forward bias current of a Si diode when forward bias voltage of 0.4V is applied, the reverse saturation current is 1.17×10-9A and the thermal voltage is 25.2mV.
In the figure, D1 is a real silicon p-n junction diode with a drop of 0.7 V under forward bias condition and D2 is a Zener diode with breakdown voltage of -6.8 V. The input Vin(t) is a periodic square wave of period T, whose one period is shown in the figure. Assuming 10τ ≪ T, where τ is the time constant of the circuit, the maximum and minimum values of the output waveform are respectively,
The input voltage V1 of the circuit the circuit is 2V and resistor has a resistance of 1KΩ. The cut-in voltage of the silicon diode is 0.7V and the reverse saturation current is 10-8A. The temperature at which diode operates is 30°C. The voltage across resistor when diode starts conducting is _________________
Silicon devices can be employed for a higher temperature limit (190°C to 200°C) as compared to germanium devices (85°C to 100°C). With respect to this, which of the following are incorrect? 1) Higher resistivity of silicon 2) Higher gap energy of silicon 3) Lower intrinsic concentration of silicon 4) Use of silicon devices in high-power applications Select the correct answer using the code given below:
What is the expected reading obtained on a Digital Display Meter with diode-checking function when a proper functioning silicon semiconductor diode is connected across its leads in the forward bias configuration?
In the given circuit input voltage V1 is -3V and V2 is -1V. The resistance R1 is 1K. Cut-in voltage of diode is 0.5V. Forward bias resistance is 10Ω. The approximate current I is _________ (Use piecewise linear model of diode)
In the given circuit input voltage V is 2V and VB is 1V. The resistance R1 and R2 is 1K. Cut-in voltage of diode is 0.5V. Forward bias resistance is 10Ω. The current I will be (Use piecewise linear model of diode)
In the given circuit input voltage V is 3V and VB is 1V. The resistance R1 and R2 is 1K. Cut-in voltage of diode is 0.5V. Forward bias resistance is 10Ω. The current I will be (Use piecewise linear model of diode)