Bissoy.com
Doctors Medicines MCQs Q&A

For continuous beams, the distance between two points of zero moments in the beam may be assumed as

For continuous beams, the distance between two points of zero moments in the beam may be assumed as Correct Answer 0.7 times the effective span

As per is 456:2000, Note mentioned in Clause 23.1.2, Page No. 37

For continuous beam and framed structures, the distance between point of contraflexures may be assumed as 0.7 times the effective span of the beam.

Related Questions

Consider the following statements regarding types of supports and beams: 1. When both supports of beams are roller supports, the beam is known as simply supported beam. 2. A beam with one end fixed and the other end free is known as fixed beam. 3. A beam with both ends fixed is known as cantilever beam. 4. A beam with one end fixed and the other simply supported is known as propped cantilever. Which of the above statements is/are correct ?
In which of the following cases, there exists the situation of Pure Bending in some part of the beam or along the entire beam? i) A simply supported beam subjected to two equally spaced downward concentrated loads ii) A simply supported beam subjected to two equally spaced opposite moments iii) A cantilever beam subjected to clockwise moment at free end iv) An overhanging beam with both side overhangs subjected to different concentrated loads at both the free ends
Consider the following statements with regards to the shear force diagram for the beam ABCD: 1. The beam ABCD is an overhanging beam having supports at A and D only. 2. The beam carries a point load of 20 kN at C. 3. The beam carries a concentrated load of 10 kN at the end B. 4. The beam is an overhanging beam having supports at C and D only. 5. The beam carries a uniformly distributed load of 70 kN over the left hand portion AC only. Which of the above statements are correct?
Mohan traveled five cities (A, B, C, D and E) starting from home by a car which has a mileage such that the car can travel 10 km in 1 liter petrol. Distance between city A and B is twice the distance between home to city A. Distance between city B and C is thrice the distance between home to city A. Distance between city C and D is 100. Distance between city D and E is 1.5 times than the distance between B and C. Average distance traveled by Mohan was 41 km between five cities. Find how much petrol was needed by Mohan to travel from city B to D.
Consider the following statements regarding continuous beam: 1. A beam is said to be a continuous beam if it is supported on more than two supports. 2. A continuous beam is a statically indeterminate structure. 3. The degree of indeterminacy depends upon the number of supports and also on the nature of the supports. Which of the above statements are correct?
Consider the following statements : Moment Area Method proves advantageous in analyzing 1. cantilever beams. 2. symmetrically loaded simply supported beams. 3. fixed beams. 4. continuous beams. Which of the above statements are correct?
In the following question the 1st and the last part of the sentence/passage are numbered 1 and 6. The rest of the sentence/ passage is split into four parts and named P, Q, R and S. These four parts are not given in their proper order. Read the sentence/passage and find out which of the four combinations is correct. 1. Security inks misuse a similar rule that causes the clear and always showing signs of changing shades of a film of oil on water. P. At the point when two beams of light meet each other in the wake of being reflected from these distinctive surfaces, they have each travelled somewhat extraordinary distances. Q. The key is that the light is bouncing off two surfaces, that of the oil and that of the water layer beneath it. R. The separation the two beams travel figures out which wavelengths, and thus, meddle productively and look brilliant. S. Since light is an electromagnetic wave, the pinnacles and troughs of each beam at that point meddle either usefully, to seem brilliant, or dangerously, to seem diminish. 6. Since the separation the beams travel changes with the point as you take a look at the surface, diverse hues look splendid from changed review edges.
In continuous beams ______________ moments is always less than support moments.
The following statements (S1, S2, S3) pertain to an under the reinforced beam of concrete. Choose the correct statements. S1: These beams are deeper when compared to a balanced beam section. S2: The failure of the beam takes place due to the failure of steel. S3: These beams undergo large deflections at failure.
Two beams PQ (fixed at P and with a roller support at Q, as shown in Figure I, which allows vertical movement) and XZ (with a hinge at Y) are shown in the Figures I and II respectively. The spans of PQ and XZ are L and 2L respectively. Both the beams are under the action of uniformly distributed load (W) and have the same flexural stiffness, EI (where, E and I respectively denote modulus of elasticity and moment of inertia about axis of bending). Let the maximum deflection and maximum rotation be δmax1 and θmax1, respectively, in the case of beam PQ and the corresponding quantities for the beam XZ be δmax2 and θmax2, respectively. Which one of the following relationships is true?