Bissoy.com
Doctors Medicines MCQs Q&A

For two survey points the coordinates are given. The line CD has length and bearing

For two survey points the coordinates are given. The line CD has length and bearing
Correct Answer 470.81 m, S 43°40'36" W

Related Questions

An engineering survey is proposed in a highway alignment project. The survey include following stages: 1. Preliminary Survey 2. Reconnaissance 3. Map study 4. Final location & detailed Survey. The sequential order of the stages in which the engineering survey is carried out is : (Use Codes 1 to 4 for answering)
A trapezium is formed by joining two parallel line segments of unequal length. The arrangement of both lines is such that the excessive length of the longer parallel line segment is equally distributed on both sides of the end point of shorter line segment. The non-parallel line segments are of equal length and the length of parallel line segments in 10 cm and 18 cm. What is the area of trapezium if the perimeter is 38cm?
Put the statements in an order to divide the line AB into 10 parts using the principle of diagonal scales. i. Number the division-points as 1, 2, 3, up to 9 starting from C and later join AC. ii. Divide the line BC into 10 equal parts. iii. Draw a perpendicular line BC TO the line AB. iv. Hence 9’9 is 0.9AB and similarly, other 2’2 is 0.2AB. v. Number the cutting points on AC as 1’, 2’, 3’ and so on up to 9’. vi. Draw lines parallel to AB through the division-points.
Given are the steps to draw a perpendicular to a line from a point outside the line, when the point is near an end of the line. Arrange the steps. Let AB be the line and P be the point outside the line i. The line ED is perpendicular to AB ii. Now take C as centre and CP as radius cut the previous arc at two points say D, E. iii. Join E and D. iv. Take A as center and radius AP draw an arc (semicircle), which cuts AB or extended AB at C.
Arrange the following stages in a sequence, such that they result in an ogee curve between two parallel lines AB and CD, such that they are the tangents to the arc. m) Join the adjacent ends B and C with a straight line. n) Divide the line BC into four parts using the points P1, P2, P3. o) Draw lines such that they pass through the points P1, P2, P3, and are perpendicular to the line BC. p) Draw the perpendicular lines through the points B and C such that they cut the lines passing through P1, P3 respectively at E and F. q) With the center E draw an arc BP2 and with center F draw an arc P2C, thus arc BP2C is required ogee curve.
The Cartesian coordinates can be related to cylindrical coordinates and spherical coordinates. State True/False.
Convert the (10, 90, 60) coordinates to Cartesian coordinates which are in Spherical coordinates.
Consider the cross-section of a beam made up of thin uniform elements having thickness t (t << a) shown in the figure. The (x, y) coordinates of the points along the center-line of the cross-section are given in the figure. The coordinates of the shear center of this cross-section are:
A straight line segment is 36 cm long. Points are to be marked on the line from both endpoints. From each end, the first point is at a distance of 1 cm from the end, the second point is at a distance of 2 cm from the first point and the third point is at a distance of 3 cm from the second point and so on. If the points on the ends are not counted and the common points are counted as one, what is the number of points?
Points P and Q are connected by a line segment. The coordinates of the points are (4,6) and (-5, -3) respectively. What is the ratio in which the line PQ is divided by point R (-1, 1) ?