Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

In the diaphragm clutch inward movement of the throw out bearing causes the diaphragm spring to
A centrifugal clutch has four shoes. When the clutch is at rest, each shoe is pulled against a stop by a spring so that it leaves a radial clearance of 10 mm between the shoe and the rim. The pull exerted by the spring is then 700 N. The mass centre of the shoe is 150 mm from the axis of the clutch. If the internal diameter of the rim is 500 mm, the mass of each shoe is 6 kg, the stiffness of each spring is 75 N/mm and the coefficient of friction between the shoe and the rim is 0.35; find the power transmitted by the clutch at 400 r.p.m.
A centrifugal clutch has four shoes. When the clutch is at rest, each shoe is pulled against a stop by a spring so that it leaves a radial clearance of 7.5 mm between the shoe and the rim. The pull exerted by the spring is then 600 N. The mass centre of the shoe is 120 mm from the axis of the clutch. If the internal diameter of the rim is 350 mm, the mass of each shoe is 5 kg, the stiffness of each spring is 60 N/mm and the coefficient of friction between the shoe and the rim is 0.2; find the speed of the centrifugal clutch, if the power transmitted is 40.168 kW.
Consider the following statements regarding clutches 1. Dry clutch has higher coefficient of friction compared to wet clutch 2. The torque capacity of wet clutch is high compared to dry clutch. 3. The engagement in a dry clutch is smoother than in case of wet clutch. Which of the above statements is/are correct ?
When a closely-coiled helical spring of mean diameter (D) is subjected to an axial load (W), the deflection of the spring ($$\delta $$) is given by (where d = Diameter of spring wire, n = No. of turns of the spring and C = Modulus of rigidity for the spring material)
A closely coiled helical spring is acted upon by an axial force. The maximum shear stress developed in the spring is $$\tau $$. The half of the length of the spring if cut off and the remaining spring is acted upon by the same axial force. The maximum shear stress in the spring in new condition will be
An open coiled helical compression spring 'A' of mean diameter 50 mm is subjected to an axial load ‘W’. Another spring 'B' of mean diameter 25 mm is similar to spring 'A' in all respects. The deflection of spring 'B' will be __________ as compared to spring 'A'.
A conical friction clutch is used to transmit 50 kW at 1000 r.p.m. The semi cone angle is 15° and the coefficient of friction is 0.2. If the mean diameter of the bearing surface is 450 mm and the intensity of normal pressure is not to exceed 0.15 N/mm2, find the axial spring force necessary to engage the clutch.
A conical friction clutch is used to transmit 40 kW at 1300 r.p.m. The semi cone angle is 12.5° and the coefficient of friction is 0.25. If the mean diameter of the bearing surface is 400 mm and the intensity of normal pressure is not to exceed 0.2 N/mm2, find the axial spring force necessary to disengage the clutch.
Which of the following statement is/are correct? (A) Arab Spring originated in Tunisia (B) Arab Spring was led by Saudi Arabia (C) Arab Spring spread to Afghanistan, Iraq, and Iran (D) Arab Spring is a floricultural movement