Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Consider the following statements regarding clutches 1. Dry clutch has higher coefficient of friction compared to wet clutch 2. The torque capacity of wet clutch is high compared to dry clutch. 3. The engagement in a dry clutch is smoother than in case of wet clutch. Which of the above statements is/are correct ?
X is the part of the single-plate clutch that helps to provide damping actions against torsional vibrations. Y is the part of the single-plate clutch that helps establish even contact with the driven plate facing. What are X and Y?
A single plate clutch, having n = 2, has outer and inner radii 200 mm and 175 mm respectively. The maximum intensity of pressure at any point is 0.05 N/mm2. If the µ is 0.4 and the power generated by the clutch is equal to 32.384 kW, determine the speed of the clutch.
A centrifugal clutch has four shoes. When the clutch is at rest, each shoe is pulled against a stop by a spring so that it leaves a radial clearance of 10 mm between the shoe and the rim. The pull exerted by the spring is then 700 N. The mass centre of the shoe is 150 mm from the axis of the clutch. If the internal diameter of the rim is 500 mm, the mass of each shoe is 6 kg, the stiffness of each spring is 75 N/mm and the coefficient of friction between the shoe and the rim is 0.35; find the power transmitted by the clutch at 400 r.p.m.
A centrifugal clutch has four shoes. When the clutch is at rest, each shoe is pulled against a stop by a spring so that it leaves a radial clearance of 7.5 mm between the shoe and the rim. The pull exerted by the spring is then 600 N. The mass centre of the shoe is 120 mm from the axis of the clutch. If the internal diameter of the rim is 350 mm, the mass of each shoe is 5 kg, the stiffness of each spring is 60 N/mm and the coefficient of friction between the shoe and the rim is 0.2; find the speed of the centrifugal clutch, if the power transmitted is 40.168 kW.
In Sanjay Cafe, the charges for Maharashtrian meal plate is Rs. 45 and charges for South Indian meal plate is Rs. 60. In a particular month, 40 Maharashtrian meal plate were served while number of South Indian meal plate served was 65, then what is the ratio of total charges collected for Maharashtrian meal plate and total charges collected for South Indian meal plate?
Rinki has three plates of Jalebies: Plate A, Plate B and Plate C. Plate A has only one Jalebi, Plate B has five Jalebies and Plate C has three Jalebies. She wants to put equal numbers of Jalebies in all the plates. Which of the following statement is true?
For a single plate clutch, n = 2, whereas for a multi plate clutch, n can take any values ≥ 2. True or false?
Which one of the statement is correct?
1. Petrol engine is a reciprocating engine
2. Petrol engine is high speed engine
3. Petrol engine uses petrol as fuel
4. Petrol engine is internal combustion engine
A plate clutch consists of 1 pair of contacting surfaces. The inner and outer diameter of the friction disk is 100mm and 200mm respectively. The coefficient of friction is 0.2 and permissible intensity of pressure is 1.5N/mm². Assuming uniform wear theory, calculate the torque transmitting capacity of the clutch.