Bissoy.com
Doctors Medicines MCQs Q&A

1000 Kg of liquid at 30°C in a well stirred vessel has to be heated to 120°C, using immersed coils carrying condensing steam at 150°C. The area of the steam coils is 1.2 m2 and the overall heat transfer co-efficient to the liquid is 1500 W/m2.°C. Assuming negligible heat loss to the surrounding and specific heat capacity of the liquid to be 4 kJ/kg.°C, the time taken for the liquid to reach desired temperature will be

1000 Kg of liquid at 30°C in a well stirred vessel has to be heated to 120°C, using immersed coils carrying condensing steam at 150°C. The area of the steam coils is 1.2 m2 and the overall heat transfer co-efficient to the liquid is 1500 W/m2.°C. Assuming negligible heat loss to the surrounding and specific heat capacity of the liquid to be 4 kJ/kg.°C, the time taken for the liquid to reach desired temperature will be Correct Answer 51 min

Related Questions

In a surface condenser, the water flowing through a series of tubes at the rate of 200 kg/hr is heated from 15 degree Celsius to 75 degree Celsius. The steam condenses on the outside surface of tubes at atmospheric pressure and the overall heat transfer coefficient is estimated at 860 k J/m2 hr degree. Find the number of transfer units of the heat exchanger. At the condensing pressure, stream has saturation temperature 0f 100 degree Celsius and the latent heat of vaporization is 2160 k J/kg. Further, the steam is initially just saturated and the condensate leaves the exchanger without sub-cooling i.e. only latent heat of condensing steam is transferred to water. Take specific heat of water as 4 k J/kg K
In a surface condenser, the water flowing through a series of tubes at the rate of 200 kg/hr is heated from 15 degree Celsius to 75 degree Celsius. The steam condenses on the outside surface of tubes at atmospheric pressure and the overall heat transfer coefficient is estimated at 860 k J/m2 hr degree. Find the effectiveness of the heat exchanger. At the condensing pressure, stream has a saturation temperature 0f 100 degree Celsius and the latent heat of vaporization is 2160 k J/kg. Further, the steam is initially just saturated and the condensate leaves the exchanger without sub-cooling i.e. only latent heat of condensing steam is transferred to the water. Take specific heat of water as 4 k J/kg K
Each question below is followed by two statements I and II. You have to determine whether the data given in the statements are sufficient for answering the question. You should use the data and your knowledge of Mathematics to choose the best possible answer. What is the ratio of coconut oil and milk in the final beaker? If contents from four vessels poured in it. I. Vessel B has 10 ml more capacity than vessel A and the ratio of coconut oil and milk in vessel B is 2 ∶ 7. Vessel C has coconut oil and milk in the ratio 2 ∶ 3 and contains 38 ml more capacity than Vessel D II. Vessel A has milk and coconut oil in the ratio 3 ∶ 5. Vessel C has 12 ml more coconut oil than vessel D.
An apple contains 70% of water which has to be dried at 100°C down to moisture content of 15%. If the initial temperature of the food is 21°C, The latent heat of vaporization of water at 100°C and at standard atmospheric pressure is 2257kJkg-1. The specific heat capacity of the food is 3.8 kJkg-1°C-1 and of water is 4.186 kJkg-1°C-1. Calculate the quantity of heat energy required per unit weight of the original material, for drying under atmospheric pressure?
There are two vessels A and B. Vessel A is containing 60L of Pure milk and vessel B is containing 28L of pure water. From vessel A, 8L of milk is taken out and poured into vessel B. Then, 6L of mixture (milk and water) is taken out from vessel B and poured into vessel A. What is the ratio of the quantity milk in vessel A to the quantity of pure water in vessel B?
A single pass shell and tube heat exchanger, consisting of a bundle of 100 tubes (inner diameter 25 mm and thickness 2 mm) is used for heating 28 kg/s of water from 25 degree Celsius to 75 degree Celsius with the help of a steam condensing at atmospheric pressure on the shell side with condensing heat transfer coefficient 5000 W/m2 degree. Make calculation for overall heat transfer coefficient based on the inner area. Take fouling factor on the water side to be 0.002 m2 degree/W per tube and neglect effect of fouling factor on the shell side and thermal resistance of the tube wall
In a counter flow heat exchanger, water flowing through a tube of 10 cm inner diameter is heated by steam condensing on the outside of the tube. The convective film coefficient on the water and steam side are estimated to be 12000 and 20000 k J/m2 hr degree. Neglecting tube thickness and its resistance to heat flow, workout the overall heat transfer coefficient for the heat exchanger
Consider the following statement: a) In the refrigerator the temperature of the system is more than the surrounding b) In the refrigerator the temperature of the system is less than the surrounding c) In the heat pump the temperature of the system is more than the surrounding d) In the heat pump the temperature of the system is less than the surrounding Which of the above statements is CORRECT?
A two pass surface condenser is required to handle the exhaust from a turbine developing 15 MW with specific steam consumption of 5 kg/k W h. The quality of exhaust steam is 0.9, the condenser vacuum is 66 cm of mercury while the bar meter reads 76 cm of mercury. The condenser tubes are 28 mm inside diameter, 4 mm thick and water flows through tubes with a speed of 3 m/s and inlet temperature 20 degree Celsius. All the steam is condensed, the condensate is saturated water and temperature of cooling water at exit is 5 degree Celsius less than the condensate temperature. Assuming that overall coefficient of heat transfer is 4 k W/m2 degree, determine the mass of cooling water circulated
A vessel of capacity 2 litre has 25% alcohol and another vessel of capacity 6 litre had 40% alcohol. The total liquid of 8 litre was poured out in a vessel of capacity 10 litre and thus the rest part of the vessel was filled with the water. what is the new concentration of mixture ?