Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Consider the following statements with regards to the shear force diagram for the beam ABCD: 1. The beam ABCD is an overhanging beam having supports at A and D only. 2. The beam carries a point load of 20 kN at C. 3. The beam carries a concentrated load of 10 kN at the end B. 4. The beam is an overhanging beam having supports at C and D only. 5. The beam carries a uniformly distributed load of 70 kN over the left hand portion AC only. Which of the above statements are correct?
In which of the following cases, there exists the situation of Pure Bending in some part of the beam or along the entire beam? i) A simply supported beam subjected to two equally spaced downward concentrated loads ii) A simply supported beam subjected to two equally spaced opposite moments iii) A cantilever beam subjected to clockwise moment at free end iv) An overhanging beam with both side overhangs subjected to different concentrated loads at both the free ends
Consider the following statements regarding types of supports and beams: 1. When both supports of beams are roller supports, the beam is known as simply supported beam. 2. A beam with one end fixed and the other end free is known as fixed beam. 3. A beam with both ends fixed is known as cantilever beam. 4. A beam with one end fixed and the other simply supported is known as propped cantilever. Which of the above statements is/are correct ?
Consider the following statements: 1. The thickness of the gusset plate should not be more than the thickness of the structural members being connected. 2. A plate girder is essentially a beam and its moment of resistance depends upon its section modulus. 3. The function of the flanges in a plate girder is to resist the bending moment and hence their respective areas can be reduced near the supports of a simply supported beam. Which of the above statements are correct?
Consider the following statements: Correct estimation of loss of prestress is required for assessing 1. The serviceability behaviour of a PSC beam. 2. The ultimate shear resistance of PSC beam. 3. The ultimate moment of resistance of PSC beam. Which of the above statements is/are correct?
P, Q, R, Sand T are five crops that Babu grows. T is fast growing and more water demanding than R which gives more yield than T. P gives more yield than R and grows faster than Q. Q is more water demanding than T but is second lowest yielder, S is the slowest growing and least water demanding of all crops but gives highest yield. R is more water demanding and grows faster than P. Select the crop or crops that has/ have as many as crops that are more water demanding and as many as crops that give less yield than it. 
There are eight cars A, B, C, D, E, F, G and H. Each car has a different price. Price of C is more than that of A and D. Price of at least two cars is less than A. Price of F is more than that of G and H. Price of D is less than G, but more than E. Price of B is less than H, but more than G. Price of at least four cars is more than that of C. Which of the following sequence is correct?
Sinking of an intermediate support of a continuous beam
i) reduces the negative moment at support
ii) increases the negative moment at support
iii) reduces the positive moment at center of span
iv) increases the positive moment at center of span
The correct answer is
An overhanging beam, having same overhangs of length L/2 on both the sides, is subjected to clockwise moment M on the left side free end and anticlockwise moment M on the right side free end. What is the deflection of midpoint of the beam, if distance between the supports is L? (Take Flexural Rigidity of beam = EI)
Which of the following is the imaginary beam of same span as the original beam loaded with M/EI diagram of the original beam, such that the shear force and bending moment at a section will represent the rotation and deflection at that section in the original beam?