Bissoy.com
Doctors Medicines MCQs Q&A

In a gas welding of mild steel using an oxyacetylene flame, the total amount of acetylene consumed is 10 litres. The oxygen consumption from the cylinder is

In a gas welding of mild steel using an oxyacetylene flame, the total amount of acetylene consumed is 10 litres. The oxygen consumption from the cylinder is Correct Answer 10 litres

In a gas welding of mild steel using an oxyacetylene flame, the total amount of acetylene consumed is 10 litres. The oxygen consumption from the cylinder is 10 liters

Related Questions

A milk seller bought certain quantity of pure milk. He first sold 20 litres of pure milk. He added 20 litres of water to the remaining quantity of milk. He then sold 20 litres of the milk water mixture and added 20 litres of water to the mixture. He again sold 20 litres of this milk water mixture and added 20 litres of water to the mixture. Now, the ratio of milk to water is 8 : 19. How much quantity of pure milk in litres did he buy in the first place?
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. and __________ a small circular flame
In the following passage, some of the words have been left out. Read the passage carefully and select the correct answer for the given blank out of the four alternatives. When the kerosene burned, the fuel in the tank below would be __________ pressure, and __________a small circular flame would appear in the burner.The valve had to be opened to let more kerosene vapour to the burner and pumping resumed. With the increase in pressure, the burner flame would spread _________ a loud noise. To lower the flame,the valve had to be _________ opened to reduce the pressure and then tightened until the desired flame size was achieved. _________ you wanted the flame to be bigger, you had to hit the piston again. Pump stoves are still in vogue. was achieved. _________ you wanted the flame
Which of the following statement(s) is/are true regarding butt welding? 1. Flash butt welding is a combination of resistance, arc and pressure welding 2. Upset butt welding is used for welding rods 3. Percussion Welding is a self timing spot welding method 4. Aluminium alloys are flash welded
“What is the different between height and radius of solid cylinder?” Which of the following option is sufficient alone to find the answer? A) A solid cylinder is made by melting a solid sphere. The radius of cylinder is 3 times the radius of a circle whose area is 154 sq.m. Height of cylinder is equal to the height of cone whose volume is 2772 cubic meters. B) Area of a rectangle whose longer side is ¾ times the radius of a solid cylinder, is 168 sq.m and, Volume of solid cylinder is 2772 cubic meters and its height is 18 m. C) A metallic cone of radius 15m and height 35m is melted into the solid cylinder of radius equal to the radius of a circle whose area is equal to the area of rectangle whose sides are in the ratio 4 : 3 respectively. D) The curved surface area of the solid cylinder is 3 time the surface area of a sphere of radius 7m and height of cylinder is equal to the height of a metallic cone whose curved surface area is 308 sq.m. 
Study the given pie-chart and answer the question that follows. The pie-chart represents the consumption of fuel (in million litres) by various modes of transport of a country X in the year 2015. The total consumption of fuel by various modes of transport of the country is 800 million litres. (The data shown here is only for mathematical exercise. They do not represent the actual figures of the country.) The fuel consumed by light vehicles is approximately what percentage of the combined consumption of fuel for aviation and waterways?
The pie chart given below shows the fuel consumption by five vehicles V1, V2, V3, V4 and V5. In a month total fuel consumption by all five vehicles is 720 litre. Fuel consumption of a particular vehicle is shown in terms of degree with respect to the total fuel consumption by all these five vehicles. J1 = Difference between the fuel consumption of V4 and V5. J2 = Difference between the fuel consumption of V1 and V2. What is the value of J2 – J1?
30 litres of salt solution contains 5% salt. How many litres of water must be added so as to get a resulted solution containing 3% salt? A. 20 litres B. 25 litres C. 30 litres D. 35 litres
Given below are quantities named A,B and C. Based on the given information, you have to determine the relation between the quantities. You should use the given data and your knowledge of mathematics to choose among the possible answer. A milkman has 132 litres mixture of milk and water in a container which contains milk and water in the ratio 7 : 5. The milk man sold 48 litres of the mixture and added 6 litres of pure milk and 20 litres of water to the remaining mixture. The milkman again sold 42 litres of the mixture. Quantity A: Find the quantity of milk left in the container. Quantity B: Find the quantity of water left in the container. Quantity C: 35 litres.
An automobile owner reduced his monthly petrol consumption when the prices went up. The price-consumption relationship is as follows:  Price (in Rs. per litre) 40 50 60 75  Monthly consumption (in litres) 60 48 40 32 If the price goes up to Rs.80 per litre, his expected consumption (in litres) will be