Related Questions

In a plain milling cutter, the chip space between the back of one tooth and the face of the next tooth is called
A Face
B Fillet
C Gash
D Land
In an orthogonal cutting, the depth of cut is halved and the feed rate is double. If the chip thickness ratio is unaffected with the changed cutting conditions, the actual chip thickness will be
A Doubled
B Halved
C Quadrupled
D Unchanged
The cutting force in up milling ________ per tooth movement of the cutter.
A Is zero
B Is maximum
C Decreases from maximum to zero
D Increases from zero to maximum
In a milling operation, two side milling cutters are mounted with a desired distance between them so that both sides of a workpiece can be milled simultaneously. This set up is called
A Gang milling
B Straddle milling
C String milling
D Side milling
In oblique cutting system, the cutting edge of the tool
A May clear the width of the workpiece
B May or may not clear the width of the workpiece
C May not clear the width of the workpiece
D Should always clear the width of the workpiece
In machining metal, cutting force at the cutting edge is measured by a
A Wattmeter
B Dynamometer
C Hydrometer
D Pyrometer
In oblique cutting of metals, the cutting edge of the tool is
A Perpendicular to the workpiece
B Perpendicular to the direction of tool travel
C Parallel to the direction of tool travel
D Inclined at an angle less than 90° to the direction of tool travel
The Central Processing Unit is an embeded chip that acts as the 'brains' of a computer. What Intel chip was used in the Altair (the first real personal computer)?
A 6502
B 8080
C 6400
D 8286
In down milling, the thickness of chip is
A Minimum at the beginning of the cut and maximum at the end of the cut
B Maximum at the beginning of the cut and minimum at the end of the cut
C Uniform throughout the cut
D None of these
In up milling, the thickness of chip is
A Minimum at the beginning of the cut and maximum at the end of the cut
B Maximum at the beginning of the cut and minimum at the end of the cut
C Uniform throughout the cut
D None of these

Next steps