Related Questions

At an Electronic Data processing unit, five out of the eight program sets P,Q,R,S,T,U,V and W are to be operated daily. On any one day, except for the first day of a month, only three of the program sets must be the ones that were operated on the previous day. The program operating must also satisfy the following conditions: 1. If program P is to be operated on a day, V can’t be operated on that day. 2. If Q is to be operated on a day, T must be one of the programs to be operated after Q. 3. If R is to be operated on a day, V must be one of the programs to be operated after R. 4. The last program to be operated on any day must be either S or U. If the program sets R and W are to be operated on the first day, which of the following could be the other program on that day?
The cutting speed for drilling aluminium, brass and bronze with carbon steel drills is _________ cutting speed for drilling mild steel with high speed steel drills.
Pipes P and Q fill a cistern in 12 minutes when operated together, Q and R fill it in 20 minutes when operated together and P and R fill it in 15 minutes when operated together. In how many minutes can all 3 pipes fill the cistern if operated together?
What is the distance covered by boat N upstream in 5 hours? Which of the following option is sufficient alone to find the answer? A) Boat M is travelling downstream with 20% more downstream speed of boat N. Speed of boat M in still water is 10% more than the speed of boat N in still water. B) Boat M and Boat N are travelling downstream with speed 33 km/hr and 40 km/hr respectively and speed of boat M is still water is 2 times the speed of stream. C) Speed of boat M in still water is 6 km/hr less then speed of boat N in still water and speed of stream is 10 km/hr. D) Speed of stream is ½ times the speed of boat N in still water and downstream speed of boat M is 44 km/hr. E) Speed of stream is 10 km/hr and ratio of upstream speed of boat M and boat N is 3 : 2 respectively.
Combined carbon content in iron and steel is determined by treating the sample with dilute HNO3. So that combined carbon forms a soluble brown nitrated compound, the intensity of which is matched with that of a standard sample of similar composition treated under similar condition. The intensity of color produced is proportional to the carbon content of iron of steel sample. This method of combined carbon determination is called the
If Rati travels at his usual speed for ‘x’ hours, he covers the same distance as he covered when he travels at a speed 30 km/hr less than usual, but for (x + 3) hours. Which of the following can be determined? (A) If he travels at 20 km/hr less speed than usual, he can cover a distance of 240 km in (x - 1) hours. What is the value of ‘x’? (B) If travels at his usual speed for (t + 2) hours, and at 50% of his usual speed for (t - 2) hours, his average speed for the journey is 68 km/hr. What is his usual speed? (C) His usual speed (in km/hr) is a multiple of 5 between 40 and 50 (both inclusive). If ‘x’ is a whole number, what is his usual speed? (D) If he travels at his usual speed for ‘t’ hours, he covers a distance of 400 km. What is the value of ‘x’?
What does the term ‘carbon count’ means? 1. A measure of the amount of carbon dioxide you produce through your lifestyle every day. 2. A measure of the amount of carbon present on Earth. 3. A measure of the amount of carbon and carbon dioxide on Earth. Select the correct answer using the code given below.
When operated separately, pipe A takes 5 hours less than pipe B to fill a cistern, and when both pipes are operated together, the cistern gets filled in 6 hours. In how much time (in hours) will pipe B fill the cistern, if operated separately?
When operated separately, pipe A takes 5 hours less than pipe B to fill a cistern, and when operated together, the cistern gets filled in 6 hours. In how much time (in hours) will pipe A fill the cistern, if operated separately?
The two surfaces of a 5 mm thick plate of carbon steel are maintained at a carbon concentration of 104 mol. m-3 on one side and zero concentration on the other side. Taking the diffusion coefficient of carbon in austenite to be 10-11 m-2.s-1, the steady state flux (mol.m-3.s-1) through the thickness of the steel is