Related Questions

The cutting speed for drilling aluminium, brass and bronze with carbon steel drills is _________ cutting speed for drilling mild steel with high speed steel drills.
A Equal to
B Less than
C More than
D None of these
High speed steel drills can be operated at about _________ the speed of high carbon steel drills.
A One-half
B One-fourth
C Double
D Four times
A simply supported beam A carries a point load at its mid span. Another identical beam B carries the same load but uniformly distributed over the entire span. The ratio of the maximum deflections of the beams A and B, will be
A $$\frac{2}{3}$$
B $$\frac{3}{2}$$
C $$\frac{5}{8}$$
D $$\frac{8}{5}$$
High speed steel cutting tools operate at cutting speeds _________ than carbon steel tools.
A 2 to 3 times lower
B 2 to 3 times higher
C 5 to 8 times higher
D 8 to 20 times higher
The percentage of carbon in low carbon steel is
A 0.05%
B 0.15%
C 0.3%
D 0.5%
Carbon percentage in medium carbon steel is around
A 0.1 to 0.35
B 0.35 to 0.5
C 0.8 to 1.4
D 1 to 1. 5
A company produces five types of shirts -- A,B,C,D and E-using cloth of three qualities -- high, medium and low , using dyes of three qualities-- high, medium and low. One shirt requires 1.5 m of cloth .The following table gives respectively : The number of shirts (of each category) produced, in thousands. The percentage distribution of cloth quality in each type of shirt, and The percentage distribution of dye quality in each type of shirt. How many metres of high quality cloth is consumed by A-type shirts?
A 30,00 m
B 24,00 m
C 112,000 m
D 8,00 m
A company produces five types of shirts -- A,B,C,D and E-using cloth of three qualities -- high, medium and low , using dyes of three qualities-- high, medium and low. One shirt requires 1.5 m of cloth .The following table gives respectively : The number of shirts (of each category) produced, in thousands. The percentage distribution of cloth quality in each type of shirt, and The percentage distribution of dye quality in each type of shirt. What is the ratio of the three qualities of dyes in high quality cloth ?
A 7:9:10
B 1:2:5
C 2:1
D Cannot be determined
High carbon steel contains more than __________ percent carbon.
A 0.5
B 2.2
C 2.5
D 2.8
A steel mill produces 180 tons of steel per month Raw materials cost for each ton of production is Tk. 1200. Other expenses of that mill are Tk. 90,000 in each month what should be the selling price of each ton of steel in order to make 10% profit?
A 1870
B 1845
C 1842
D 18145

Next steps