For a twin cylinder V-engine, the crank positions for primary reverse cranks and secondary direct cranks are shown in the below figure. The engine is a<br> <img src="/images/question-image/mechanical-engineering/theory-of-machine/1528355297-44.JPG" title="Theory of Machine mcq question image" alt="Theory of Machine mcq question image">

For a twin cylinder V-engine, the crank positions for primary reverse cranks and secondary direct cranks are shown in the below figure. The engine is a

A

30° V-engine

B

60° V-engine

C

120° V-engine

D

150° V-engine

In the below figure, PC is the connecting rod and OC is the crank making an angle $$\theta $$ with the line of stroke PO and rotates with uniform angular velocity at $$\omega $$ rad/s. The Klien's acceleration diagram for determining the acceleration of the piston P is shown by quadrilateral CQNO, the acceleration of the piston is _________ when the crank OC and connecting rod PC are at right angles to each other.
Theory of Machine mcq question image

A

Infinity

B

Zero

C

Any +ve value

D

Any -ve value

In the below figure, PC is the connecting rod and OC is the crank making an angle θ with the line of stroke PO and rotates with uniform angular velocity at $$\omega $$ rad/s. The Klien's acceleration diagram for determining the acceleration of the piston P is shown by quadrilateral CQNO. The acceleration of the piston P with respect to the crank-pin C is given by
Theory of Machine mcq question image

A

$${\omega ^2}$$ × NO

B

$${\omega ^2}$$ × CO

C

$${\omega ^2}$$ × CN

D

$${\omega ^2}$$ × QN

“What is the different between height and radius of solid cylinder?” Which of the following option is sufficient alone to find the answer? A) A solid cylinder is made by melting a solid sphere. The radius of cylinder is 3 times the radius of a circle whose area is 154 sq.m. Height of cylinder is equal to the height of cone whose volume is 2772 cubic meters. B) Area of a rectangle whose longer side is ¾ times the radius of a solid cylinder, is 168 sq.m and, Volume of solid cylinder is 2772 cubic meters and its height is 18 m. C) A metallic cone of radius 15m and height 35m is melted into the solid cylinder of radius equal to the radius of a circle whose area is equal to the area of rectangle whose sides are in the ratio 4 : 3 respectively. D) The curved surface area of the solid cylinder is 3 time the surface area of a sphere of radius 7m and height of cylinder is equal to the height of a metallic cone whose curved surface area is 308 sq.m.

A

Only A and B

B

Only B and C

C

Only B

D

All A, B, C and D

E

None of A, B, C and D

In the below figure, PC is the connecting rod and OC is the crank making an angle $$\theta $$ with the line of stroke PO and rotates with uniform angular velocity at $$\omega $$ rad/s. The Klien's acceleration diagram for determining the acceleration of the piston P is shown by quadrilateral CQNO, if N coincides with O, then
Theory of Machine mcq question image

A

Acceleration and velocity of the piston P is zero

B

Acceleration and velocity of the piston P is maximum

C

Acceleration of the piston P is zero and its velocity is maximum

D

Acceleration of the piston P is maximum and its velocity is zero

The secondary unbalanced force due to inertia of reciprocating parts in a reciprocating engine is given by (where m = Mass of reciprocating parts, $$\omega $$ = Angular speed of crank, r = Radius of crank, $$\theta $$ = Angle of inclination of crank with the line of stroke and n = Ratio of the length of connecting rod to radius of crank)

A

$${\text{m}}{\omega ^2}{\text{r}}\sin \theta $$

B

$${\text{m}}{\omega ^2}{\text{r}}\cos \theta $$

C

$${\text{m}}{\omega ^2}{\text{r}}\frac{{\sin 2\theta }}{{\text{n}}}$$

D

$${\text{m}}{\omega ^2}{\text{r}}\frac{{\cos2\theta }}{{\text{n}}}$$

The primary unbalanced force due to inertia of reciprocating parts in a reciprocating engine is given by (where m = Mass of reciprocating parts, $$\omega $$ = Angular speed of crank, r = Radius of crank, $$\theta $$ = Angle of inclination of crank with the line of stroke and n = Ratio of the length of connecting rod to radius of crank)

A

$${\text{m}}{\omega ^2}{\text{r}}\sin \theta $$

B

$${\text{m}}{\omega ^2}{\text{r}}\cos \theta $$

C

$${\text{m}}{\omega ^2}{\text{r}}\frac{{\sin 2\theta }}{{\text{n}}}$$

D

$${\text{m}}{\omega ^2}{\text{r}}\frac{{\cos2\theta }}{{\text{n}}}$$

The pictorial view of the frustum of a square pyramid is shown in figure 'X'. Its top view, when viewed in the direction of the arrow, will look like which of the given alternatives 1, 2, 3 and 4?
Figure Formation and Analysis mcq question image

Figure Formation and Analysis mcq question image

A

1

B

2

C

3

D

4

ABCD is a four bar mechanism in which AB = 310 mm and CD = 450 mm. AB and CD are both perpendicular to the fixed link AD, as shown in the below figure. If the velocity of B at this condition is v. Then the velocity of C is
Theory of Machine mcq question image

A

$$\frac{1}{3}$$ v

B

$$\frac{2}{3}$$ v

C

$$\frac{3}{2}$$ v

D

$$\frac{9}{4}$$ v

In a differential band brake as shown in the below figure, the drum rotates anticlockwise and the greater tension T₁ acts at A and smaller tension T₂ at B. Length OA is greater than length OB. In order to apply the brake, the force P at C should
Theory of Machine mcq question image

A

Be zero

B

Act in upward direction

C

Act in downward direction

D

None of the above

For a twin cylinder V-engine, the crank positions for primary reverse cranks and secondary direct cranks are shown in the below figure. The engine is a

Related Questions