Related Questions

You are about to install a second IDE hard drive in a PC that has only one IDE adapter. Your first hard drive will still be the boot drive. How should the second drive be configured?
A as a master
B as a secondary
C as a slave
D as a primary
E as auto-select
If we want to connect a few computers in a small office, all the computers in one building, or all the computers in several buildings in close proximity, which type of network is required?
A PAN
B LAN
C MAN
D SAN
In a shipment of computers, 1% of the computers are defective. What is the ratio of defective to non-defective computers?
A 1 : 200
B 1 : 100
C 1 : 99
D 99 : 1
You just installed a new IDE hard drive, but your system BIOS will not recognize the new drive, what should you check first.
A cable sequence
B jumpers on the hard drive
C drivers that need to be loaded
D hard drive manufacturer web site information
E None of the above
You are installing an IDE hard drive that will be your boot drive. Which is the correct order of steps that need to be followed?
A jumper properly, auto-detect(or configure manually) in CMOS, low level format, high level format, partition
B jumper properly, auto-detect(or configure manually) in CMOS, partition, high level format with / s switch
C jumper properly, partition, auto-detect(or configure manually in CMOS, high level format with /s switch
D jumper properly, auto-detect in CMOS, regular format
E jumper properly, partition, low level format, high level format
Your PC tells you that your 200 M hard drive is out of space . However , when you run DIR .the total size of your files add to less than 200 M. How do you account for this difference ?
A Rounding
B Hidden files
C Math error
D Drive specifications are in hexadecimal , whereas the DIR Command calculates decimal
A system has two IDE hard drives that are each divided into primary and extended partitions, which drive letter is assigned to the primary partition of the second drive?
A C
B D
C E
D F
E None of the above
What is your first action when windows reports that your hard drive is developing bad sectors?
A replace the hard drive
B run secclean from dos
C run defrag on the hard drive
D run scandisk with the "thorough" option
E None of the above
When connecting two internal SCSI hard disks to a computer, where do you connect the second hard drive?
A Any open SCSI port on the computer
B A Serial port on the first host adapter
C An open parallel port on the computer
D An open SCSI port on the first hard drive
E None of the above
In which addressing mode the effective address of the operand is the contents of a register specified in the instruction and after accessing the operand, the contents of this register is incremented to point to the next item in the list?
A index addressing
B indirect addressing
C auto increment
D auto decrement
E None of the above

Next steps