Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

Consider the following statements in respect of dams: 1. In a gravity dam, a grout curtain is provided near the toe to reduce the exit gradient. 2. A drainage gallery with its drainage pipe system provided in a gravity dam reduces the uplift pressure at all levels below the upstream water level. 3. An earthquake acceleration of 0.1 g acting vertically downward causes a decrease of 10% in the limit weight of concrete and of water in a gravity dam. 4. The Tehri dam is a gravity dam. Which of the above statements are correct?
The maximum permissible eccentricity, for no tension at the base of the gravity dam, is Where B = base width of the dam
A concrete gravity dam having a maximum reservoir level at 200 m and the RL of the bottom of the dam 100 m. The maximum allowable compressive stress in concrete is 3000 KN/m2 and the specific gravity of concrete is 2.4. Calculate the height of the dam and check whether it is a high dam or low dam.
The base width of a solid gravity dam is 35 m and the specific gravity of dam material is 2.45. What is the approximate allowable height of the dam having an elementary profile without considering the uplift?
Calculate the eccentricity of a trapezoidal dam with a distance between the centre of gravity and point where the resultant cuts the base is 5m. The bottom width of the dam is 3m.
The maximum permissible eccentricity for no tension at the base of a gravity dam is
The ratio of base width 'b' to height 'h' of an elementary profile of a gravity dam, from 'no tension' consideration, is given by Where G = specific gravity of dam material K = uplift pressure intensity and  μ = coefficient of friction           
The ratio of base width ‘b’ to height ‘h’ of an elementary profile of a gravity dam from ‘no tension’ consideration is given by Where G = specific gravity of dam material K = uplift pressure intensity μ = coefficient of friction
Some small cubes of same height 7 cm but variable length and width are put inside a large cuboid of height 21 cm. Length and width of cuboid is 32 cm and 24 cm, respectively. Small cubes are put such that cubes at the bottom most layer is of similar base area; second layer contains all the cubes of similar base area and third layer have all the cubes of similar base area. Which of the following statement(s) given below is / are TRUE? A: If side of each small cubes at bottom most layer is 8 cm, then maximum number of small cubes that can be put at bottom most layer is 12. B: If maximum of 48 cubes can be put at second layer, then side of each cube at second layer is 6 cm. C: If side of each small cubes at third layer is 1.6 cm, then maximum number of small cubes that can be put at third layer is 300.
The vertical stress at the toe was found to be 3.44 MPa at the base of the gravity dam section. If the downstream face of the dam has a slope of 0.617 horizontal: 1 vertical, the maximum principal stress at the toe of the dam when there is no tailwater is _______________