Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

The furnace of a boiler is laid from fire clay brick with outside lagging from the plate steel, the distance between the two is quite small compared with the size of the furnace. The brick setting is at an average temperature of 365 K whilst the steel lagging is at 290 K. Calculate the radiant heat flux. Assume the following emissivity values For brick = 0.85 For steel = 0.65
The solid brick shown is made of small square shaped bricks of side 1. when the large brick is disassembled into its component small bricks. the total surface area of all the small bricks is how much greater than the surface area of the large brick?
The method of moving each brick through a small horizontal distance before it is finally laid in any brick wall and pressing it by means of brick hammer, is known as
108 kg of mixture C was prepared by mixing equal quantities of mixtures A and B, made up of chalk powder and brick powder, such that the ratio of chalk and brick powder in mixture C is 17 ∶ 10. If mixture A comprised of 22 kg chalk powder, how much brick powder was present in mixture B?
Match List-I with List-II and select the correct answer using the code given below the Lists: List I (Low-Latitude Climate) List I (Characteristic) A. Wet Equatorial 1. Uniform temperatures, mean near 27°C  B. Monsoon and trade wind coastal 2. Marked temperature cycle with very high temperature before the rainy season C. Wet-dry tropical  3. Temperatures show an annual cycle with a high temperature in the high-Sun season Strong temperature cycle. with intense temperature during the high-Sun season  D. Dry tropical 4. Strong temperature cycle, with intense temperature during the high-Sun season
If the solubilities of different components (in a liquid-liquid extraction system) increase with rise in temperature, then the temperature above which they dissolve completely is known as the critical solution temperature (CST or consolute temperature). If solubilities increase with decrease in temperature, then CST is the temperature below which they dissolve completely. If a binary system has no critical solution temperature, it implies that
Nuclear Fusion' is the process of combining of two or more light nuclei. What is the required temperature (approximately) for nuclear fusion?
The fusion temperature of Chromite brick is
In what temperature range zirconia is cubic?
What is the structure of zirconia in a temperature range of 1100 to 2360˚C?