Bissoy.com
Doctors Medicines MCQs Q&A

In an arc welding experiment, the current, voltage and electrode travel speed were 140 A, 22 V, and 15 cm/min respectively. The heat input per unit length of the weld is given by . . . . . . . . kJ/cm.

In an arc welding experiment, the current, voltage and electrode travel speed were 140 A, 22 V, and 15 cm/min respectively. The heat input per unit length of the weld is given by . . . . . . . . kJ/cm. Correct Answer 12.32

Related Questions

In the consumable electrode shielded metal arc welding process, which of the following observations are correct?
P. The, weld composition does not depend upon the basicity of the slag.
Q. Basic flux is used to achieve low hydrogen content-and low inclusion content in the weld metal.
R. Reverse polarity of the direct current power source is used to weld thin sheets.
S. Coated electrodes are classified by tensile strength of the weld metal deposit.
Which of the following statement(s) is/are true regarding butt welding? 1. Flash butt welding is a combination of resistance, arc and pressure welding 2. Upset butt welding is used for welding rods 3. Percussion Welding is a self timing spot welding method 4. Aluminium alloys are flash welded
Arc welding is done using current, voltage and welding speed of 200 A, 20 V and 0.01 m/s, respectively. The heat input in KJ per unit length is
In DC arc welding, if leads are arranged in work as Negative pole of the welding arc and electrode as Positive pole of the welding arc, the arrangement is known as
What is the distance covered by boat N upstream in 5 hours? Which of the following option is sufficient alone to find the answer? A) Boat M is travelling downstream with 20% more downstream speed of boat N. Speed of boat M in still water is 10% more than the speed of boat N in still water. B) Boat M and Boat N are travelling downstream with speed 33 km/hr and 40 km/hr respectively and speed of boat M is still water is 2 times the speed of stream. C) Speed of boat M in still water is 6 km/hr less then speed of boat N in still water and speed of stream is 10 km/hr. D) Speed of stream is ½ times the speed of boat N in still water and downstream speed of boat M is 44 km/hr. E) Speed of stream is 10 km/hr and ratio of upstream speed of boat M and boat N is 3 : 2 respectively.
You are given a question and two statements. Idientify which of the statements is/are sufficient to answer the question. Question: In a city, some people travel to work by bus, some people travel to work by train, some people travel to work by both bus and train, and some travel to work neither by bus, nor by train. The number of people who travel to work by both bus and train is how much less than the number of people who travel to work by neither? Statements: (1) In the city, there are 384 people who travel to work by bus. (2) In the city, there are 672 people who travel to work by train,
Consider the following statements: In metal arc welding 1. Utilizes a consumable electrode 2. A welding torch used is connected to acetylene gas supply 3. The electrode and work-piece are connected to the welding power supply. Which of these statements are correct?
A fillet-welded joint is subjected to transverse loading F as shown in the figure. Both legs of the fillets are of 10 mm size and the weld length is 30 mm. If the allowable shear stress of the weld is 94 MPa, considering the minimum throat area of the weld, the maximum allowable transverse load per weld in kN is
"It is now expected that the variable production cost per unit and the selling price per unit will each increase by 10%, and fixed production cost will rise by 25%. What will be the new break even point?
Selling price - Rs 6 per unit
Variable production cost - Rs 1.20 per unit
Variable selling cost - Rs 0.40 per unit
Fixed production cost - Rs 4 per unit
Fixed selling cost - Rs 0.80 per unit
Budgeted production and sales for the year are 10,000 units."
Arc shielding is accomplished by covering the electrode tip, arc, and molten weld pool with a blanket of gas or flux, or both, which inhibit exposure of the weld metal to air.