Related Questions

Stretcher strains found in a low carbon sheet are associated with the
A Texture
B Dislocation density
C Yield point phenomenon
D Thickness of the sheet
The bond in which headers and stretchers are laid in alternate courses and every stretcher course is started with a three fourth brick bat, is known as
A English cross bond
B Dutch bond
C Monk bond
D Rat-trap bond
As compared to stretcher course, the thickness of joints in header course should be
A Less
B More
C Equal
D Equal or more
The stretcher bond in brick masonry can be used only when the thickness of wall is
A 90 mm
B 180 mm
C 190 mm
D 280 mm
Stretcher bar is provided
A To permit lateral movement of the tongue rail
B To maintain the two tongue rails at the exact distance
C To ensure exact gauge at the toe of the switch as well as the nose of crossing
D To prevent any vertical movement between the wing rail and nose of crossing
Number of vertical joints in a stretcher course is x times the number of joints in the header course, where x is equal to
A $$\frac{1}{2}$$
B 1
C 2
D $$\frac{1}{4}$$
The patient was taken ____ the ambulance from a stretcher
A unto
B onto
C into
D up to
The operation of producing cup shaped parts from flat sheet metal blanks by bending and plastic flow of metal, is known as
A Drawing
B Squeezing
C Coining
D Planishing
The scattering resulting from fiber imperfections like core-cladding RI differences, diameter fluctuations, strains, and bubbles is
A Rayleigh scattering
B Mie scattering
C Stimulated Brillouin scattering
D Stimulated Raman scattering
The materials which fracture even at small strains are termed as brittle, while those materials which exhibit an appreciable deformation before failure are termed as
A Rigid
B Tough
C Ductile
D Plastic

Next steps