Related Questions

In sheet metal forming, stretcher strains occur in
A duralumin sheets
B low carbon steel sheets
C austenitic stainless steel sheet
D Ni-base alloy sheet
The bond in which headers and stretchers are laid in alternate courses and every stretcher course is started with a three fourth brick bat, is known as
A English cross bond
B Dutch bond
C Monk bond
D Rat-trap bond
As compared to stretcher course, the thickness of joints in header course should be
A Less
B More
C Equal
D Equal or more
The stretcher bond in brick masonry can be used only when the thickness of wall is
A 90 mm
B 180 mm
C 190 mm
D 280 mm
Stretcher bar is provided
A To permit lateral movement of the tongue rail
B To maintain the two tongue rails at the exact distance
C To ensure exact gauge at the toe of the switch as well as the nose of crossing
D To prevent any vertical movement between the wing rail and nose of crossing
Number of vertical joints in a stretcher course is x times the number of joints in the header course, where x is equal to
A $$\frac{1}{2}$$
B 1
C 2
D $$\frac{1}{4}$$
The patient was taken ____ the ambulance from a stretcher
A unto
B onto
C into
D up to
If you need 98 ounces of iron and 2 ounces of carbon to make a sheet of steel. How much iron you need in ounces to make 12 sheet steel?
A 98
B 50
C 49
D 198
The percentage of carbon in low carbon steel is
A 0.05%
B 0.15%
C 0.3%
D 0.5%
A coal having high ratio of volatile matter to fixed carbon as compared to a coal having low ratio of volatile matter to fixed carbon
A Is less liable to spontaneous combustion on storage
B Is more difficult to ignite and produces a shorter flame
C Requires smaller combustion space and less secondary air
D None of these

Next steps