Related Questions

Number of vertical joints in a stretcher course is x times the number of joints in the header course, where x is equal to
A $$\frac{1}{2}$$
B 1
C 2
D $$\frac{1}{4}$$
The stretcher bond in brick masonry can be used only when the thickness of wall is
A 90 mm
B 180 mm
C 190 mm
D 280 mm
The bond in which headers and stretchers are laid in alternate courses and every stretcher course is started with a three fourth brick bat, is known as
A English cross bond
B Dutch bond
C Monk bond
D Rat-trap bond
Stretcher bar is provided
A To permit lateral movement of the tongue rail
B To maintain the two tongue rails at the exact distance
C To ensure exact gauge at the toe of the switch as well as the nose of crossing
D To prevent any vertical movement between the wing rail and nose of crossing
In sheet metal forming, stretcher strains occur in
A duralumin sheets
B low carbon steel sheets
C austenitic stainless steel sheet
D Ni-base alloy sheet
Stretcher strains found in a low carbon sheet are associated with the
A Texture
B Dislocation density
C Yield point phenomenon
D Thickness of the sheet
The patient was taken ____ the ambulance from a stretcher
A unto
B onto
C into
D up to
The correct relationship among displacement thickness d, momentum thickness m and energy thickness e is
A d > m > e
B d > e > m
C e > m > d
D e > d > m
These types of pipes are generally connected with bell and spigot joints or flanged joints:
A Soil and waste
B Water and gas
C Water and steam
D Gas and soil
The drive-shafts are connected to the differential and wheel hubs through universal joints because the universal joints
A Absorb the vibrations transferred from the surface of the road
B Compensate for variations in the relative positions of the differential and the wheels which result from bumpy road surfaces or other similar driving conditions.
C Absorb any difference in speed between the left and right wheels when the vehicle is turning
D None of the above

Next steps