The drive-shafts are connected to the differential and wheel hubs through universal joints because the universal joints

A Absorb the vibrations transferred from the surface of the road
B Compensate for variations in the relative positions of the differential and the wheels which result from bumpy road surfaces or other similar driving conditions.
C Absorb any difference in speed between the left and right wheels when the vehicle is turning
D None of the above

Correct Answer: Compensate for variations in the relative positions of the differential and the wheels which result from bumpy road surfaces or other similar driving conditions.

The drive-shafts are connected to the differential and wheel hubs through universal joints because the universal joints Compensate for variations in the relative positions of the differential and the wheels which result from bumpy road surfaces or other similar driving conditions.
Bissoy MCQ
#Mechanical Engineering #Automobile Engineering

Related Questions

A circular wheel 28 inches in diameter rotates the same number of inches per second as a circular wheel 35 inches in diameter. If the smaller wheel makes x revolutions per second, how many revolutions per minutes does the larger wheel make in terms of x?
A 12x
B 24x
C 36x
D 48x
A wheel that has 6 cogs is meshed with a wheel of 14 cogs. When the smaller wheel has made 21 revolutions the number of revelution made by the larger wheel is --
A 4
B 9
C 12
D 49
A circular wheel 28 inches in diameter rotates (moves) the same number of inches per second as a circular wheel 35 inches in diameter. If the smaller wheel makes x revolutions per second, how many revolutions per minute does the larger wheel make in terms of x?
A 12x
B 48x
C 24x
D 36x
The fundamental equation for correct steering is (where $$\varphi $$ and $$\alpha $$ = Angle through which the axis of the outer wheel and inner wheel turns respectively, c = Distance between the pivots of the front axles and d = Wheel base)
A $$\sin \varphi + \sin \alpha = \frac{{\text{b}}}{{\text{c}}}$$
B $$\cos \varphi - \sin \alpha = \frac{{\text{c}}}{{\text{b}}}$$
C $$\cot \varphi - \cot \alpha = \frac{{\text{c}}}{{\text{b}}}$$
D $$\tan \varphi + \cot \alpha = \frac{{\text{b}}}{{\text{c}}}$$
Which of the following examines information passing through switches, hubs, or routers?
A Key logger
B Packet sniffer
C Log analysis tools
D Screen captures
A wheel that had 6 cogs in meshed with a larger wheel if 14 cogs. When the smaller wheell had made 21 revolutions, the number wheel will be-
A 5
B 8
C 10
D 9
Interconnected networks need communication processors such as switches, routers, hubs, and gateways. Select the best fit for answer:
A TCP/IP
B Protocol
C Open Systems
D Internetwork processor
Routers operate at layer _____. LAN switches operate at layer _____. Ethernet hubs operate at layer _____. Word processing operates at layer _____.
A 3, 3, 1, 7
B 3, 2, 1, none
C 3, 2, 1, 7
D 3, 3, 2, none
E All of the above
These types of pipes are generally connected with bell and spigot joints or flanged joints:
A Soil and waste
B Water and gas
C Water and steam
D Gas and soil
In a simple on-off controller with differential gap, the magnitude of differential gap determines
A The level of accuracy
B The life of controller
C Both (a) and (b)
D Neither (a) nor (b)

Next steps