Related Questions

If the main reinforcement of the slab is parallel to a T-beam, the transverse reinforcement at mid span of the slab is provided at least __________ of main reinforcement.
A 40%
B 50%
C 60%
D 70%
ACI Code অনুসারে Column এর Minimum longitudinal reinforcement কত?
A ০.৫%
B ১%
C ২%
D ৩%
In R.C. sewer pipes, the percentage longitudinal reinforcement to the cross-sectional area of concrete is kept
A 10.0
B 5.0
C 2.0
D 0.25
In order to set drawing limits for a 'C' size architectural drawing the drafter should set the limits to ________.
A 0, 0 and 2, 9
B 0, 0 and 17, 11
C 0, 0 and 18, 24
D 0, 0 and 34, 24
According to Euler's column theory, the crippling load for a column of length (l) fixed at both ends is __________ the crippling load for a similar column hinged at both ends.
A Equal to
B Two times
C Four times
D Eight times
-Column row+Column row+Column row এই ফরমূলা কিসের?
A ভাগ এর
B যোগ এর
C গুণ এর
D বিয়োগ এর
Minimum pitch of transverse reinforcement in a column is
A The least lateral dimension of the member
B Sixteen times the smallest diameter of longitudinal reinforcement bar to be tied
C Forty-eight times the diameter of transverse reinforcement
D Lesser of the above three values
The spacing of transverse reinforcement of column is decided by the following consideration.
A The least lateral dimension of the column
B Sixteen times the diameter of the smallest longitudinal reinforcing rods in the column
C Forty-eight times the diameter of transverse reinforcement
D All the above
According to load factor method, the permissible load ‘W’ on a short column reinforced with longitudinal bars and lateral stirrups, is
A Stress in concrete × area of concrete
B Stress in steel × area of steel
C Stress in concrete × area of concrete + Stress in steel × area of steel
D None of these
The diameter of longitudinal bars of a column should never be less than
A 6 mm
B 8 mm
C 10 mm
D 12 mm

Next steps