Bissoy.com
Doctors Medicines MCQs Q&A

A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The extension in the rod was 1 mm only. If Esteel = 2 × 106 kg/cm2, the side of the rod, is

A steel rod 1 metre long having square cross section is pulled under a tensile load of 8 tonnes. The extension in the rod was 1 mm only. If Esteel = 2 × 106 kg/cm2, the side of the rod, is Correct Answer 2 cm

Related Questions

Given below are three quantities named 1, 2 and 3. Based on the given information, you have to determine the relationship between the three quantities. You should use the given data and knowledge of Mathematics to choose between the possible answer. Quantity 1: Area of the innermost square. A square is made by joining the midpoints of a square of area 200 sq. m. The outermost square is called Square 1, The square inside it is called Square 2. The next square is made by joining midpoints of square 2 and is called Square 3. This process goes on. Square 5 is the innermost square. Quantity 2: A man starts with a speed of 10 km/hr. He increases his speed by 10 km/hr every hour at the start and drives at the same speed for that hour. If he traveled a total distance of 550 km. Find the time Quantity 3: Height of cylinder Its volume is equal to the volume of a cone whose radius is 14 cm and height is 39.3 cm. The radius of the cylinder is 14 cm
A hollow rod has frictionless inner walls. Inside the rod are two small spheres that are kept on either side of the centre of rod. The rod is rotated about its central axis which is perpendicular to the plane of rotation. If the rod had been rotated by an impulsive torque which gave it an instantaneous angular velocity of 5rad/s, what will be the angular velocity after some finite but long time ‘t’? Assume no external forces act on rod after the impulse. Also state what will happen to the spheres in the centre of the rod. The rod has a mass =2kg & length =10cm. The two spheres have a mass =1kg each.
A tensile rod of 40kN is acting on a rod of diameter 40mm and of length 4m. a bore of diameter 20mm is made centrally on the rod. To what length the rod should be bored so that the total extension will increase 30% under the same tensile load if E = 2×105 N/mm2?
Seven people A, B, C, D, E, F and G live on separate floors of a 7-floor building. Ground floor is numbered 1, first floor is numbered. 2 and so on until the topmost floor is numbered 7. Each one of these having a different cars-Cadillac, Ambassador, Fiat, Maruti, Mercedes, Bedford and Fargo but not necessarily in the same order. Only three people live above the floor on which A lives. Only one person lives between A and the one having a car Cadillac. F lives immediately below the one having a car Bedford. The one having a car Bedford lives on an even-numbered floor. Only three people live between the ones having a car Cadillac and Maruti. E lives immediately above C. E is not having a car Maruti. Only two people live between B and the one having a car Fargo. The one having a car Fargo lives below the floor on which B lives. The one having a car Fiat does not live immediately above D or immediately below B. D does not live immediately above or immediately below A. G does not have a car Ambassador. Question : How many people live between the floors on which D and the one having a car Bedford ?
A copper rod of square cross-section is fixed between two rigid supports and over which a steel rod of square cross-section is simply placed. If the temperature of the whole assembly is raised by T °C, the stresses in steel and copper respectively are 
During a tensile test on a specimen of 1 cm cross-section, maximum load observed was 8 tonnes and area of cross-section at neck was 0.5 cm2. Ultimate tensile strength of specimen is
Calculate ultimate moment and shear of effective span is 30m, live load is 9kn/m, dead load excluding self weight is 2kn/m, load factors for dead load is 1.4 for live load is 1.6 cube strength of concrete fcu is 50n/mm2 cube strength at transfer is fci is 35n/mm2, tensile strength of concrete Ec is 34kn/mm2 loss ratio ɳ is 0.85 and 8mm diameter high tensile strength fpu is 1500n/mm2 are available for use and the modulus of elasticity of high tensile wires is 200kn/mm2?
Two boats of length 17.5 metre and 22.5 metre are separated by a distance of 800 metre started moving towards each other. If the boats can cross each other’s distance in 4 sec, then find the time from starting when they will 1000 metre apart.
Twenty-nine times the area of a square is one square metre less than six times the area of the second square and nine times its side exceeds the perimeter of other square by 1 metre. The difference in the sides of these squares is :
A 250 metre long train takes 30 seconds to cross a 350 metres long bridge. How much time train will take to cross a 550 metre long bridge?