Related Questions

Before starting an isometric drawing in Auto-CAD the drafter needs to ________.
A Set the grid to isometric
B Set the current layer to Def-points
C Turn Object Snap off
D Turn Ortho off
In order to create an isometric circle to represent a hole through the top surface of a box, the drafter must insure that the correct iso-plane has been selected by scrolling through the iso-planes using the ________ key.
A F1
B F3
C F5
D F8
A drafter who develops technical drawings of a highway overpass would most likely be a ________ drafter.
A Architectural
B Civil
C Mechanical
D Process piping
Lines of an isometric drawing that are not parallel to the isometric axes are called this:
A Trimetric lines
B Non-isometric lines
C Multiview lines
D Dimetric lines
When setting up a mechanical drawing in Auto-CAD the drafter should set the units to ________.
A Fractional
B Decimal
C Architectural
D Metric
In order to set drawing limits for a 'C' size architectural drawing the drafter should set the limits to ________.
A 0, 0 and 2, 9
B 0, 0 and 17, 11
C 0, 0 and 18, 24
D 0, 0 and 34, 24
In order to create an accurate assembly drawing the drafter should create the ________ drawings first.
A Detail
B Title block
C Parts list
D Isometric
Inserting blocks into a drawing file usually requires exacting placement. The drafter should insure that ________ is turned on.
A O Snaps
B Ortho
C Grid
D Dynamic Input
In developing a multi-view drawing, the drafter can use a ________ line to help locate the top and right side views.
A Object
B Hidden
C Dimension
D Miter
In an exploded assembly drawing it is customary for the drafter to use a ________ line to illustrate how parts fit together.
A Phantom
B Hidden
C Dashed
D Center

Next steps