Bissoy.com
Doctors Medicines MCQs Q&A

The failure data analysis of a longwall mining system consisting of thre major subsystems revealed that the failure rate of shearer, face conveyor any stage loader are 0.15/ hour, 0.2/ hour and 0.1/ hour respectively. If all the subsystems must be running for a satisfactory system operation, the reliability of the longwall system for a period of 4 hours is

The failure data analysis of a longwall mining system consisting of thre major subsystems revealed that the failure rate of shearer, face conveyor any stage loader are 0.15/ hour, 0.2/ hour and 0.1/ hour respectively. If all the subsystems must be running for a satisfactory system operation, the reliability of the longwall system for a period of 4 hours is Correct Answer 0.165

Related Questions

Given below are quantities named A,B and C. Based on the given information, you have to determine the relation between the quantities. You should use the given data and your knowledge of mathematics to choose among the possible answer. Quantity A: Tap1 and Tap2 can fill the tank in 16 hours and 25 hours respectively. Both the taps opened together. After some time Tap 1 is closed and after that the tank is filled in 12 hours. In how many hour Tap 1 and 2 work together? Quantity B: Three taps 1, 2, 3 can fill a cistern in 10,14,18 hours respectively. If tap 1 is kept open all the time and tap 2 and 3 is opened alternatively for an hour then find in how many hours the tank will be filled? Quantity C: Two taps 1 and 2 are such that tap 1 fills the tank in 10 hours and tap2 empties it in 20 hours. If tap 1 is opened first and after 5 hours tap 1 is closed and tap 2 is opened, then the tank emptied in x hours and find the value of x?
Which one of the following is the correct sequence of various stages of operating cycle of a manufacturing company?  1. Raw material conversion period, work-in-progress conversion period, Finished goods conversion period, Receivables conversion period 2. Raw material conversion period, work-in-progress conversion period, Creditors payment period, Receivables conversion period 3. Creditor payment period. Raw material conversion period, Receivables conversion period, work-in- progress conversion period 4. Raw material conversion period, Finished goods conversion period, work-in- progress conversion period. Receivables conversion period 
A bunker-conveyor system as shown in the figure works under the following scheme:
i. Bunker and two conveyors running
ii. Bunker and either of the two conveyors running
If the bunker and the two conveyors have identical reliability of 0.9. the system reliability is
Mine System Engineering mcq question image
Air samples collected from the intake and the return gates of a retreating longwall face show methane concentration values of 0.1% and 0.8% respectively. The production from the longwall face is 2000 tonne/day and the air quantity circulating the face is 15 m3/s. The rate of methane emission in m3 per tonne of coal produced is
6 faces of a cube is painted with different colour. Red face is opposite to the black face. The face adjacent to the bottom face is white. Brown face is adjacent to blue face. Red face is at the bottom. Which face will be on exactly opposite to the brown face.
In an opencast mine shown in the figure below, the coal has a density of 1.4 t/m3. Assuming mining operation started from plane XY, the operating stripping ratio under the given conditions in m3/t is
Introduction to Mining Engineering mcq question image
A pumping station in a mine has 4 pumps, P1, P2, P3 and P4 which are connected functionally in parallel configuration as shown in the figure. The individual reliability of the pumps P1, P2, P3 and P4 are 0.80, 0.90, 0.85 and 0.95 respectively. For an effective dewatering operation in the mine denoting system success, at least three pumps should be in operation. The reliability of the system is
Mine System Engineering mcq question image
A, B, C, D, E and F are six girls who use 6 different face wash – Pond’s, Lakme, Lotus, Garnier, Himalaya and Kaya (but not necessarily in the same order). They also like six different colours – Red, Blue, Brown, Peach, Black and White (also not necessarily in the same order. A and C do not like a Red colour. The girl who uses Lakme face wash likes Peach colour. The girl who likes White colour does not use Kaya nor Lotus face wash. B neither likes Peach nor Red colour. D does not like a Blue colour but uses a Lotus face wash. The girl who uses Pond’s face wash likes Red colour. C does not use Lakme face wash nor likes white colour. F neither uses Himalaya nor Kaya face wash but likes Brown colour. Who does use Himalaya’s face wash?
Figure shows a two pulley system for hoisting a load of 10 kN. The coefficient of friction between each pulley and the rope is 0.2. The vertical and horizontal distances between the centers of the pulleys are 25m and 16m respectively. The tensions T1 and T2 respectively in kN are
Mining Machinery mcq question image
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: Pipe A takes thrice the time taken by Pipe B to fill a tank. Together they can fill the tank in 15 hours, tank A and B is opened together for 4 hours and then Pipe A is closed and after 2 more hours Pipe B is closed and an outlet Pipe C is opened which when working alone can empty the tank in 10 hours. Calculate the time taken by C to empty the tank. Quantity B: A pipe A can fill the tank in 10 hours another pipe B can fill the tank in 15 hours and with the help of third pipe C they can fill the tank in 5 hours. Pipe A is opened for 4 hours then it is closed, pipe B is closed 3 hours before filling of tank and tank C is opened the whole time. Calculate the time taken to fill the tank