Bissoy.com
Doctors Medicines MCQs Q&A

Main functions of baffles in a bioreactor are
P. To prevent a vortex.
Q. To increase aeration.
R. To reduce interfacial area of oxygen transfer.
S. To reduce aeration rate.

Main functions of baffles in a bioreactor are
P. To prevent a vortex.
Q. To increase aeration.
R. To reduce interfacial area of oxygen transfer.
S. To reduce aeration rate. Correct Answer P, Q

Related Questions

A bacterial culture having a specific oxygen uptake rate of 5 mmol O2 (g DCW)-1 hr-1 is being grown aerobically in a fed-batch bioreactor. The maximum value of the volumetric oxygen transfer coefficient is 0.18 s-1 for the stirred tank bioreactor and the critical dissolved oxygen concentration is 20% of the saturation concentration (8 mg mL-1). The maximum density to which the cells can be grown in the fed-batch process without the growth being limited by oxygen transfer, is approximately
Which of the following statements is correct regarding the oxidation number of Oxygen? I. The oxidation number of Oxygen in most compounds is -2. II. When Oxygen is bonded to Fluorine in compounds like Oxygen difluoride and Dioxygen diflouride, the Oxygen is assigned an oxidation number of +2 and +2 respectively. III. In peroxide, an Oxygen atom is assigned an oxidation number of -1 and in Superoxide, each oxygen atom is assigned an oxidation number of -1/2.
The free energy change associated with homogeneous nucleation of a sphere (assume the radius as 5m) has an interfacial energy term and a volume free energy. Calculate the value of the interfacial term if the interfacial energy is given as (1/п) kJ/m2Kmol?
Consider for simplicity a wire frame suspending a liquid film. If one bar of the frame is movable it is found that a force 5N per unit length must be applied to maintain the bar in position. If this force moves a small distance so that the total area of the film is increased by 0.5m2. Interfacial free energy per unit area is given as 4 J/m2. Calculate the change in interfacial energy? (Take the area of interface as 2m2)
Consider the following statements regarding contact stabilization process: 1. Primary settling tank is not required in some cases. 2. BOD removal occurs in two stages. 3. Aeration volume requirements are approximately 50% of those of a conventional – or tapered – aeration plant. 4. Returned sludge is aerated for 30 min to 90 min in sludge aeration tank. Which of the above statements are correct?
There is an increase in free energy due to interfacial energy is known as a capillarity effect or the Gibbs-Thomson effect. Find the increase in this free energy if the interfacial energy, the molar volume and the radius of the spherical particle are given as 10 (kJ/mm2), 6mm3/mol and 4mm respectively?
As per the RBI Act, 1934, the following functions are described as the functions of a Central Bank:
1. Banking functions
2. Advisory functions
3. Supervisory functions
4. Promotional functions
Identify the correct combination:
In a well aerated and agitated microbial culture, the 'supply' of oxygen is equal to 'demand' (uptake) of the growing culture. The KLa for such a system will be (KLa = volumetric mass transfer coefficient, C* = dissolved oxygen concentration in liquid in equilibrium with gaseous oxygen, C = instantaneous value of dissolved oxygen concentration, 'r' = specific oxygen uptake rate per unit weight of cells, X = dry weight of the cells per unit volume)
Baffles are provided in a shell and tube heat exchanger to increase the turbulence and velocity of the shell side fluid. Which of the following shaped baffles does not fall in the category of transverse baffle?
Consider the following statements with reference to evaporation : 1. Rate of evaporation decrease with an increase in surface area. 2. Rate of evaporation increases with an Increase in temperature. 3. Rate of evaporation decreases with an increase in humidity. 4. Rate of evaporation increases with an increase in wind speed. Which of the above statement are correct?