Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

A dryer is used for drying pears which has initial moisture content of 70 % (wet basis) and final moisture content of 5 % (wet basis). An experimental drying curve for the product indicates that the critical moisture content is 25 % (wet basis) and the time for constant drying is 5 min. Can you estimate the total drying time for product?
In a laboratory test run, the rate of drying was found to be 0.5 × 10-3 kg/m2.s, when the moisture content reduced from 0.4 to 0.1 on dry basis. The critical moisture content of the material is 0.08 on a dry basis. A tray dryer is used to dry 100 kg (dry basis) of the same material under identical conditions. The surface area of the material is 0.04 m2/kg of dry solid. The time required (in seconds) to reduce the moisture content of the solids from 0.3 to 0.2 (dry basis) is
It takes 6 hours to dry a wet solid from 50% moisture content to the critical moisture content of 15%. How much longer it will take to dry the solid to 10% moisture content, under the same drying conditions? (The equilibrium moisture content of the solid is 5%).
The eggplant has a dry basis moisture content of 8.9 grams of water per gram of dry solids. What is its wet basis moisture content?
The apple has a dry basis moisture content of 5.7 grams of water per gram of dry solids. What is its wet basis moisture content?
How many kilograms of cherry tomatoes are required to obtain 150 kg of dried cherry tomatoes with a final moisture content of 11% wet basis? The ripe cherry tomatoes used have a moisture content of 94% wet basis.
If the weight of the hot yellow pepper cubes is 170.2grams and contains 165.5 grams of moisture content, what is the wet basis moisture content of the pepper?
A solid is being dried in the linear drying rate regime from moisture content Xo to XF. The drying rate is zero at X = 0 and the critical moisture content is the same as the initial moisture Xo. The drying time for M = (Ls/ARc) is (where, L = total mass of dry solid, A = total surface area for drying Rc = Constant maximum drying rate per unit area X = moisture content (in mass of water/mass of dry solids)
200 kg of solids (on dry basis) is subjected to a drying process for a period of 5000 seconds. The drying occurs in the constant rate period with the drying rate as, Nc = 0.5 × 10-3 kg/m2.s. The initial moisture content of the solid is 0.2 kg moisture/kg dry solid. The interfacial area available for drying is 4 m2/1000 kg of dry solid. The moisture content at the end of the drying period is (in kg moisture/kg dry solid)
In the question below are given six statements followed by four conclusions numbered I, II, III and IV. You have to take the given statements to be true even if they seem to be at variance with commonly known facts. Read all the conclusions and then decide which of the given conclusions logically follows from the given statements disregarding commonly known facts. Statements: All Petrol are Gasoline. No petrol is Water. Some Water are Gas. Some Moisture are Gas. All Gasoline are Fire No Moisture is Fire Conclusions: I. Some Moisture are Gasoline. II. Some Water are Moisture. III. Some Gasoline are Gas. IV. Some Petrol are Moisture.