Bissoy.com
Doctors Medicines MCQs Q&A

In power tiller, the steering clutch lever is possible __________

In power tiller, the steering clutch lever is possible __________ Correct Answer On the grip of right and left handles

Clutch delivers power from the engine for a smooth movement (less vibration) of the vehicle. It basically transmits the torque generated from the engine to the drivetrain.

Related Questions

Consider the following statements regarding clutches 1. Dry clutch has higher coefficient of friction compared to wet clutch 2. The torque capacity of wet clutch is high compared to dry clutch. 3. The engagement in a dry clutch is smoother than in case of wet clutch. Which of the above statements is/are correct ?
A centrifugal clutch has four shoes. When the clutch is at rest, each shoe is pulled against a stop by a spring so that it leaves a radial clearance of 10 mm between the shoe and the rim. The pull exerted by the spring is then 700 N. The mass centre of the shoe is 150 mm from the axis of the clutch. If the internal diameter of the rim is 500 mm, the mass of each shoe is 6 kg, the stiffness of each spring is 75 N/mm and the coefficient of friction between the shoe and the rim is 0.35; find the power transmitted by the clutch at 400 r.p.m.
A centrifugal clutch has four shoes. When the clutch is at rest, each shoe is pulled against a stop by a spring so that it leaves a radial clearance of 7.5 mm between the shoe and the rim. The pull exerted by the spring is then 600 N. The mass centre of the shoe is 120 mm from the axis of the clutch. If the internal diameter of the rim is 350 mm, the mass of each shoe is 5 kg, the stiffness of each spring is 60 N/mm and the coefficient of friction between the shoe and the rim is 0.2; find the speed of the centrifugal clutch, if the power transmitted is 40.168 kW.
In power tiller for transmitting the power from engine to the main clutch the belt used is __________
A single plate clutch, having n = 2, has outer and inner radii 200 mm and 175 mm respectively. The maximum intensity of pressure at any point is 0.05 N/mm2. If the µ is 0.4 and the power generated by the clutch is equal to 32.384 kW, determine the speed of the clutch.
In a hydraulic power steering system, the power steering pump is driven by a
Which one of the following is true with regard to a CPU having a single interrupt request line and single interrupt grant line? i) Neither vectored nor multiple interrupting devices is possible. ii) Vectored interrupts is not possible but multiple interrupting devices is possible. iii) Vectored interrupts is possible and multiple interrupting devices is not possible. iv) Both vectored and multiple interrupting devices are possible.
Fill in the gap : On some sailboats ----a tiller instead of a wheel for steering.
In power tiller, the power is obtained from __________
In power tiller, the tilling attachment receives the power from _____