Bissoy.com
Doctors Medicines MCQs Q&A

Which of the following expressions is true when there are no gears in a particular turbopump?

Which of the following expressions is true when there are no gears in a particular turbopump? Correct Answer NT = No = Nf

If there are no gears in a particular turbopump, then all the shaft speeds are same. So NT = No = Nf is the correct expression.

Related Questions

If L represents torque, and the subscripts T, o, f, b denotes the turbopump, oxidizer pump, fuel pump and bearings respectively, then which of the following expressions is true when there are no gears in a particular turbopump?
Consider the following statements: 1. In spur gears, the contact occurs abruptly on a line parallel to the axis, and the disengagement too is abrupt. 2. In helical gears, both loading and unloading are gradual, and therefore, these happen more smoothly and less noisily 3. When two gears mesh, any arbitrary shape of the tooth can be chosen for the profile of the teeth of any one of the two gears, and the profile for the other shall be obtained by applying the law of gearing. Which of the above statements are correct?
Consider the Assertion (A) and Reason (R) and select the correct answer:
Assertion (A) If one premise is particular, the conclusion must be particular.
Reason (R) (i) An affirmative particular has no distributed terms, and a negative particular has an only one.
(ii) The premises cannot both be particular and thus must differ in quantity.
Consider the following statements: In case of helical gears, teeth are cut at an angle to the axis of rotation of the gears. 1) Helix angle introduces another ratio called axial contact ratio. 2) Transverse contact ratio is equal to axial contact ratio in helical gears. 3) Large transverse contact ratio does not allow multiple teeth to share the load. 4) Large axial contact ratio will cause larger axial force component Which of the above statements are correct?
Among the following types of gears, which gears offer a refinement over spur gears?
In a turbopump, what are are the gear ratios for ao and af (for oxidizer pump and fuel pump respectively) if no gears are used?
Statement (I): Two  non-intersecting and non-parallel, i.e., non-coplanar, shafts connected by gears are called skew-bevel gears or spiral gears, and this type of gearing has a line contact the rotation of which about the axes generates the two hyperboloid pitch surfaces. Statement (II): A hyperboloid is a 3D surface formed by revolving a straight line about an axis (not in the same plane), such that every point on the line remains at a constant distance from the axis.
From an alloy, two specimens are machined and tested separately under tension and compression. The engineering stress-strain curves as well as the true stress-true strain curves for tension and compression are plotted in the same diagram. Identify the correct statements:
P. The engineering stress-strain curves in tension and compression are identical.
Q. The true stress-true strain curve in compression is lower than the true stresstrue strain curve in tension due to Bauschinger effect.
R. The true stress-true strain curve in tension is above the corresponding engineering stress-strain, curve.
S. The true stress-true strain curve in tension and compression are identical.
Which of the following expressions will definitely be true if the expressions ‘Z > R’ are true?
Which of the following expressions is definitely true if the expressions D < B and L > A are definitely false?