Bissoy.com
Doctors Medicines MCQs Q&A

In a turbopump, what are are the gear ratios for ao and af (for oxidizer pump and fuel pump respectively) if no gears are used?

In a turbopump, what are are the gear ratios for ao and af (for oxidizer pump and fuel pump respectively) if no gears are used? Correct Answer 1 for both

If no gears are used, ao = af = 1. For shaft speed N, aoNo = afNf, where the subscript o and f denote oxidizer and fuel respectively.

Related Questions

If L represents torque, and the subscripts T, o, f, b denotes the turbopump, oxidizer pump, fuel pump and bearings respectively, then which of the following expressions is true when there are no gears in a particular turbopump?
If the gear ratio for fuel pump is thrice that of the oxidizer pump, the shaft speed of fuel pump is ____________ the oxidizer pump.
A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. A gear train consist of spur gear as shown. Gear A receives 4kW of power at 750rpm through its shaft and rotates in CW direction. Calculate the torque on the gear C if number of teeth on gear A, B and C are 40, 70 and 30.
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. A pair of spur gears consist of 25 teeth pinion meshing with a 115 teeth gear. The module is 5mm. Calculate the gear ratio.
Following is the data for transmission system of a Gear box reduction ratios.
1st gear - 4.3 : 1
2nd gear - 3.00 : 1
3rd gear - 2.71 : 1
4th gear - 1 : 1
Final drive reduction is 5.0 : 1
The overall reduction when the vehicle is driven in 2nd gear is
Consider two shafts connected with two gears as per the following options: 1. One on each shaft 2. Through an intermediate gear mounted on an intermediate shaft, and every shaft having one gear only 3. Through an intermediate gear mounted on an intermediate shaft, with the intermediate shaft having two gears, whereas the other shafts have one gear each Which of the above represent(s) a simple gear train?
In a diesel engine
1. Fuel injection pump is used
2. Fuel injection pump and carburettor is used
3. Fuel injector is used
4. Neither fuel injection pump nor injector is used
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. Calculate the shaft angle for opposite hand of helix if helix angle of two gears are 20⁰ and 17⁰.
A solid-oxide fuel cell is fed with carbon monoxide and reacts with air to produce CO2. This reaction will produce 2 electrons which are used to power an electric circuit external to the fuel cell. The reaction equation is shown below: 2CO(g) + O2(g) -> 2CO2(g) ΔHr° = -565.96 kJ/mol This reaction does not occur for other types of fuel cells which use a catalyst, such as polymerelectrolyte membrane or phosphoric-acid fuel cells. The presence of carbon monoxide on the anode side of these types of fuel cells will cause catalyst poisoning, reducing the efficiency and voltage of the fuel cell. Determine the rate of enthalpy change for a carbon dioxide production rate of 208 mol/hr. The extent of the reaction occurring in the fuel cell can be obtained by the following equation: where:
A planetary gear train is shown in the figure. Number of teeth on the sun gear A, planet gear B and fixed ring gear D are given by 30, 70 and 140 respectively. Module is taken as 5mm. Calculate the tangential component of gear tooth force.