Bissoy.com
Doctors Medicines MCQs Q&A

Motor axial specific impulse _____ with the scarf angle.

Motor axial specific impulse _____ with the scarf angle. Correct Answer decreases

With the increase in scarf angle, the motor axial specific impulse will decrease. This is because the component of exhaust velocity directed along the vehicle’s longitudinal axis decreases with the scarf angle increase.

Related Questions

If the motor axial specific impulse of a given nozzle is 340s for propellant ‘A’ and its characteristic velocity is 1400 m/s, determine the specific impulse for the same nozzle using a propellant ‘B’ with a characteristic velocity of 980 m/s. Assume both propellants ‘A’ and ‘B’ have the same specific heat ratio.
Consider the following statements: In case of helical gears, teeth are cut at an angle to the axis of rotation of the gears. 1) Helix angle introduces another ratio called axial contact ratio. 2) Transverse contact ratio is equal to axial contact ratio in helical gears. 3) Large transverse contact ratio does not allow multiple teeth to share the load. 4) Large axial contact ratio will cause larger axial force component Which of the above statements are correct?
Fill the half-filled code snippet to get the following graph: impulse(1,, ‘red’); ____; impulse(1,, ‘blue’); impulse(1,, ‘yellow’); impulse(1,, ‘green’);
Choose the correct option after observing the given graph and the code snippet carefully. impulse(1,, ‘red’); hold on; impulse(1,, ‘blue’); impulse(1,, ‘yellow’); impulse(1,, ‘green’);
Angle ‘A’ of a cyclic quadrilateral ABCD is 53° less then angle B. Angle B is twice of angle C and angle C is 40° more than angle D. What would be the measure of angle A?
If the nozzle exit is flush with the missile skin, then the nozzle scarf angle and cant angle is the same.
Consider two rocket engines A and B with A having a specific impulse of 242s and B having a specific impulse of 150s. What can be said about their efficiency?
Determine the density specific impulse (Id) if the specific impulse is 315 s and the average density of the propellants is 840 kg/m3. Take the reference density to be the maximum density of water.
Consider the following statements: In the above figure, the curves pertain to the DC motor A. Speed vs Armature current characteristic of a DC shunt motor B. Torque vs Armature current characteristic of a DC shunt motor C. Speed vs Armature current characteristic of a DC series motor D. Torque vs Armature current characteristic of a DC series motor
In case of synchronous motor, which of the following are true? a. Synchronous motor is not self-starting b. If the rotor poles are excited by field current and the stator terminals are connected to AC supply, motor vibrates. c. Variable frequency supply is used to start synchronous motor. d. By using frequency converter, a synchronous motor can be brought from standstill to its desired speed.