Bissoy.com
Doctors Medicines MCQs Q&A

The crack growth in ductile material is by method of ______________

The crack growth in ductile material is by method of ______________ Correct Answer void coalescence

In ductile fracture, the necked region forms the range of narrow microvoids. The void merges and coalescence together to break apart the material finally. It occurs by elongation of void and bridging the gap between the voids.

Related Questions

Consider the following statements regarding crack : 1. Crack is more likely to occur in the regions of discontinuity such as oil holes. 2. Crack is more likely to occur in the regions of irregularities in machining operations such as stamp mark. 3. Crack is more likely to occur in the internal cracks due to defects in materials like blow holes. Which of the above statements are correct ? 
The crack propagation rate with stress is given as ______ Where; -> da/dN is crack growth with each cycle -> C is constant -> σm is mean stress -> σa is alternating stress -> a is the crack length -> m and n are constant
The young’s modulus of the steel is 600 MPa, and the plastic stress required to extend the crack is 50*10-9, and the initial crack length is 2 microns. Find the fracture stress required to crack the material?
In each question below is given a statement numbered I, II and III. An assumption is something supposed or taken for granted. You have to consider the following assumption and decide which of the assumption is implicit in the statement. Statement: The June 2018 quarter results of Infosys reflect that the investors waiting for the company to perform as good, if not better, than its largest peer Tata Consultancy Services (TCS) may have to wait a little longer. Infosys, the country’s second-largest software exporter reported slower sequential growth in revenue and profit than TCS for the June quarter (Q1). It also lagged on the fronts of employee attrition and growth in the banking, financial services, and insurance (BFSI) vertical.  Assumptions: I. On the positive side, Infosys continued to add large clients – four in the above $100-million billing category compared with the previous quarter. It continued to retain guidance of 6-8% revenue growth for FY19 while retaining the operating margin band of 22-24%. II. In the near term, the stock performance of TCS is likely to overshadow Infosys given the difference in their growth trajectories. III. The growth momentum of Infosys has slowed relative to TCS. The year-on-year growth in trailing 12-month (TTM) revenue of Infosys in each of the four quarters up to the June 2018 quarter has lagged TCS after leading in the previous five quarters.
Find the crack growth per cycle for a steel plate where the crack growth equation is given by: -> da/dN = A(ΔK)p The value of p=3, A= 6.9*10-18, and stress intensity factor variation is 1 kPa m1/2.
There are 2 candidates A and B. Probability that A will crack the exam is 3/4 and that B will crack the exam is 2/3. What will be the probability that only one will crack the exam?
According to Irwin’s correction of plasticity at the crack tip, the sufficient crack length is given as the actual crack length plus the radius of the plastic zone. The radius of the plastic zone (rp) in case of plane stress is given as ________
According to Irwin’s correction of plasticity at the crack tip, the effective crack length is given as the actual crack length plus the radius of the plastic zone. The radius of the plastic zone (rp) in case of plane strain is given as ________
According to the fracture theory of the material, the critical value of the crack extension force, which makes the crack propagate to the fracture is called the fracture toughness of the material.
Fracture stress for a brittle material having a crack lenght of 1μm is 200 MPa. Fracture stress for the same material having a crack lenght of 4 μm is