Bissoy.com
Doctors Medicines MCQs Q&A

Which phenomena is involved in the byproduct sulfuric acid production?

Which phenomena is involved in the byproduct sulfuric acid production? Correct Answer Burning of fuel

Burning of fuel involves the production of waste gases which is used to produce sulfuric acid. This operation is known as byproduct sulfuric acid operation. Oxidation reduction and elemental sulfur mining is basically used to produced sulfur.

Related Questions

A laboratory teacher had 1.5 litres of concentrated sulfuric acid. She replaces concentrated sulfuric acid with water after every class till the carton is empty. One student needs 10 ml of sulfuric acid mixture in every class. First class had 20 students and since then all other classes observed 10 students. Calculate total quantity of water with which mixture of sulfuric acid and water is replaced till carton is empty. Note 1.5 litres of concentrated sulfuric acid had 90% sulfuric acid and rest water
Solution-1 containing 30% sulfuric acid flowing at the rate 10 Kg/min combines with Solution-2 containing 20% sulfuric acid flowing at the rate 5 Kg/min, if their product is out at the rate 20 Kg/min what is the percentage of sulfuric acid in the product?
Consider with respect to HusserI's concept of phenomena.
1. Phenomena is a substantial unity that has real properties, real parts and real changes.
2. Phenomena is no substantial unity, that has no real parts and no real changes.
3. Phenomena has no nature, but only essence.
4. Phenomena have no essence, but only nature.
In a batch process, the reaction takes place in the presence of an acid medium. The acid is drained from the reaction vessel at the rate of 15ml/s as a result of the density difference of the acid from the reacting component. To avoid wastage of acid, it is recycled to an acid tank which has 1000 L capacity. The acid drained from the reaction vessel, picks up 50 g/L solids from the reactor. Acid is fed once again to the process from acid tank. When the process is started, the acid is almost pure in the tank as a result of filtration. As the reaction proceeds, acid in the tank gets more and more contaminated with the solids. The concentration of the solids should not exceed 100 g/L from the process point of view. The batch time is 16h. Estimate whether the concentration of the solids will exceed 100g/L during the batch reaction.
What is the number of moles in 650 mL of 98% (v/v) sulfuric acid solution if density of sulfuric acid is 1.83 g/cm3?
A stock solution of 12.0 M sulfuric acid is made available. What is the best procedure to make up 100. mL of 4.0 M sulfuric acid using the stock solution and water prior to mixing?
Acid rain is any form of precipitation with high levels of nitric and sulfuric acids. It can also occurs in the form of snow,fog and tiny bits of dry materials that settle on the ground. rotting vegetation and erupting volcanoes release some chemicals that causes acid rain but majority is because of the human activities such as burning of fossil fuels, factories and auto mobiles. Acid rain has many ecological effects, few of which are given below. Which of the following, if true, would weaken the conclusion about the effects of acid rain on the environment? 
Sulfurous acid is a weak acid, while sulfuric acid is a much stronger acid because
Some students were not involved in the strike. If the above statement is true, which of the following conclusions is/are logically necessary? 1. Some who were involved in the strike were students. 2. No student was involved in the strike. 3. At least one student was involved in the strike. 4. Some who were not involved in the strike were students.
Consider a reaction of polymer formation by condensation polymerization, completed in n-steps, with the liberation of a certain byproduct. How many total molecules of byproduct are released as a result of complete reaction?