Bissoy.com
Doctors Medicines MCQs Q&A

When k and ε values are not available, for inlet boundary conditions, they are ____________

When k and ε values are not available, for inlet boundary conditions, they are ____________ Correct Answer obtained from turbulence intensity

At the inlet boundary conditions, the k and ε values must be specified for the k-ε model. In most of the industrial CFD applications, these values will not be known. So, they are obtained from the turbulence intensity and the characteristic length of the model.

Related Questions

A wave is first reflected by a boundary P and then by a boundary Q without dissipating energy. If the boundary P is rigid and the boundary Q is non-rigid, then find the fraction of the amplitude of the reflected wave by boundary P to the reflected wave by boundary Q.
An inlet tap can fill water at the rate of 20 litres per minute. Now, before opening the inlet tap they found a leak in the tank which can empty the tank in 8 hours. They could not repair the leak and opened the inlet tap when the tank was full and it empties the tank in 10 hours. Find the capacity of tank.
An inlet tap can fill water at the rate of 12 liters per minute. Now, before opening the inlet tap they found a leak in the tank which can empty the tank in 6 hours. They could not repair the leak and opened the inlet tap when the tank was full and it empties the tank in 8 hours. Find the capacity of tank.
In the following question, two statements are numbered as A and B. On solving these statements, we get quantities A and B respectively. Solve both quantities and choose the correct option. Quantity A: There are two inlet pipes A, B and two outlet pipes C, D inlet pipe B takes 7 hours more to fill the tank when compared to A. Two outlet pipes when working together can empty the tank in 3.5 hours and efficiency of both the pipe is same if all of them working together can fill the tank in 2 hours. Calculate the time taken by A to fill the tank. Quantity B: The ratio of efficiencies of two pipes A and B is in the ratio 3 ∶ 2 and that of pipe B and C is 1 ∶ 3. Pipe A and B are inlet pipes, pipe C is outlet pipe working together they can fill the tank in 7.5 hours. Calculate the time taken by A to fill the tank when working alone.
Which of the following explain the concept of values? (A) Values are beliefs tied inextricably to human emotion and behaviour (B) Values refer to desirable goals people strive to attain (C) Values are conflict-free (D) Values are ordered by importance relative to one another (E) Values are utilized primarily to effect change in knowledge of a person Choose the correct answer from the options given below :
The nature of normal grain growth in the presence of a second phase deserves special consideration. The moving boundaries will be attached to the particles exert a pulling force on the boundary restricting its motion. Therefore if the boundary intersects the particle surface at 90° the particle will feel a pull of (2πrγcosΘ)*sinΘ. This will be counterbalanced by an equal and opposite force acting on the boundary. As the boundary moves over the particle surface Θ changes and the drag reaches a maximum value, this happens when Θ becomes______
The boundary layer thickness at a distance of l m from the leading edge of a flat plate, kept at zero angle of incidence to the flow direction, is O.l cm. The velocity outside the boundary layer is 25 ml sec. The boundary layer thickness at a distance of 4 m is (Assume that boundary layer is entirely laminar)
An Inlet pipe fills the tank at the rate of 3.5 liters/hour. And due to leak tank gets empty in 20% of time taken by both inlet and leak together. When the tank is full and due to leak and inlet pipe, the tank gets emptied in 60 hours. Find the capacity of the tank?
In a town fair 50 people were asked which dessert they liked: ice cream, Donuts, or cupcakes. 28 said they like ice cream, 26 said they like donuts, and 26 said they like cupcakes. 8 said they like all three. 17 said they like donuts and cupcakes, 11 said they like ice cream and cupcakes. 5 said they do not like any of these. Find those people who liked ice cream and donuts but not cupcakes.
There are 12 taps fitted to a cistern in which some are inlet taps and rest are outlet taps. Each inlet tap can fill the cistern in 18 hours and each outlet tap can empty the cistern in 24 hours. Find the difference between the number of inlet and outlet taps, if all the pipes when opened, 1/4th of cistern gets filled in 3 hours.