Bissoy.com
Doctors Medicines MCQs Q&A

What are the number of opening available in the cutting torch used in oxygen cutting process?

What are the number of opening available in the cutting torch used in oxygen cutting process? Correct Answer 7

Just like any other gas welding equipment, the welding torch gets substituted by a cutting torch in oxygen cutting process. The total number of openings available in the torch are six, with a large opening at the center, making the count to seven.

Related Questions

Which of the following statements is correct regarding the oxidation number of Oxygen? I. The oxidation number of Oxygen in most compounds is -2. II. When Oxygen is bonded to Fluorine in compounds like Oxygen difluoride and Dioxygen diflouride, the Oxygen is assigned an oxidation number of +2 and +2 respectively. III. In peroxide, an Oxygen atom is assigned an oxidation number of -1 and in Superoxide, each oxygen atom is assigned an oxidation number of -1/2.
In a well aerated and agitated microbial culture, the 'supply' of oxygen is equal to 'demand' (uptake) of the growing culture. The KLa for such a system will be (KLa = volumetric mass transfer coefficient, C* = dissolved oxygen concentration in liquid in equilibrium with gaseous oxygen, C = instantaneous value of dissolved oxygen concentration, 'r' = specific oxygen uptake rate per unit weight of cells, X = dry weight of the cells per unit volume)
There are two rows, each containing 3 numbers. Below are some rules to be used to get the resultant number for each row separately. Use the rule from left to right for each row and find the answer to the question. Rule: 1. If an even number is followed by an even number, then the first number will be subtracted from the second. 2. If an odd number is followed by an odd number, then both will be added. 3. If an odd number is followed by an even number, then the even number will be subtracted from the square of the odd number. 4. If an even number is followed by an odd number, then the odd number will be subtracted from the even number. Row I: 9,11, 34 Row II: 16, 9, 8 What is the difference between the resultant numbers in the first row and the second row
A bacterial culture having a specific oxygen uptake rate of 5 mmol O2 (g DCW)-1 hr-1 is being grown aerobically in a fed-batch bioreactor. The maximum value of the volumetric oxygen transfer coefficient is 0.18 s-1 for the stirred tank bioreactor and the critical dissolved oxygen concentration is 20% of the saturation concentration (8 mg mL-1). The maximum density to which the cells can be grown in the fed-batch process without the growth being limited by oxygen transfer, is approximately
There are two rows, each containing 3 numbers. Some rules are given below to be used for obtaining the resultant number for each row separately. Apply the rules for each row from left to right and answer the question. Rules: i. If an even number is followed by an even number, the first is to be subtracted from the second. ii. If an odd number is followed by an odd number, both are to be added. iii. If an odd number is followed by an even number, the even number is to be subtracted from the square of the odd number. iv. If an even number is followed by an odd number, the odd number is to be subtracted from the even number. Row I: 28, 19, 12 Row II: 13, 7, 32 What is the average of the resultant numbers of the first row and the second row?
There are 4 breeds of dogs available at a pet store. If the ratio of those dogs available is 3 : 7 : 1 : 23, find the total number of dogs available. It is known that the minimum number of dogs of any breed available is 19.
The Railways will operate Oxygen Express trains to transport liquid medical oxygen and oxygen cylinders across the country. How many PSA oxygen plants are being installed in 32 states and Union territories from PM CARES?
Mine water flowing at 1.5 m3/s with 2 mg/l dissolved oxygen, joins riverwater flowing at 7 m3/s containing 6 mg/l dissolved oxygen. The saturated value of the dissolved oxygen in the mixture is given to be 9.3 mg/l. On the basis, the initial oxygen deficit of the mixture in mg/l is
Consider the following statements: 1. HSS tools wear very rapidly, whereas in cemented carbide tools, even though hardness is retained, crater wear can occur due to solid-state diffusion. 2. Cutting tools made of Super-HSS, also known as cobalt-based HSS, are made by adding 2% to 15% of cobalt which increases the cutting efficiency at heavier cuts by increasing the hot hardness and wear resistance. 3. Tools failure due to excessive stress can be minimized by providing small or negative rake angles on brittle tool materials, protecting tool tip by providing large side-cutting edge angles, and honing a narrow chamfer along the cutting edge. Which of the above statements are correct?
Flank wear occurs mainly on the 1. Nose part of the cutting tool 2. Front relief face and side relief face of the cutting tool 3. Face of the cutting tool at the shortest distance from the cutting edge Which of the above is/are correct?