Bissoy.com
Doctors Medicines MCQs Q&A

Related Questions

“What is the different between height and radius of solid cylinder?” Which of the following option is sufficient alone to find the answer? A) A solid cylinder is made by melting a solid sphere. The radius of cylinder is 3 times the radius of a circle whose area is 154 sq.m. Height of cylinder is equal to the height of cone whose volume is 2772 cubic meters. B) Area of a rectangle whose longer side is ¾ times the radius of a solid cylinder, is 168 sq.m and, Volume of solid cylinder is 2772 cubic meters and its height is 18 m. C) A metallic cone of radius 15m and height 35m is melted into the solid cylinder of radius equal to the radius of a circle whose area is equal to the area of rectangle whose sides are in the ratio 4 : 3 respectively. D) The curved surface area of the solid cylinder is 3 time the surface area of a sphere of radius 7m and height of cylinder is equal to the height of a metallic cone whose curved surface area is 308 sq.m. 
Consider the following statements: Combustion chamber is 1. the volume between TDC and BDC during the combustion process 2. the space enclosed between the upper part of the cylinder and the top of the piston during the combustion process 3. the space enclosed between TDC and the top of the piston during the combustion process Which of the above statements is/are CORRECT?
The diameters of a small piston and a large piston of a hydraulic jack are 45 mm and 100 mm respectively.Force of 0.09 kN applied on smaller in size piston. Find load lifted by piston if smaller in size piston is 40 cm above the large piston. The density of fluid is 850 kg/m3
Just before the piston reaches TDC during exhaust stroke, injection of the fuel takes place into the inlet manifold of the cylinder at about 60º crankangle before TDC.
The top dead centre is the position of piston when it forms ____ volume in cylinder and bottom dead centre is the position of piston when it forms ____ volume in cylinder.
The curved surface area of cylinder A is 8% more than the curved surface area of cylinder B. If the height of cylinder A is 4% less than the height of cylinder B, then the volume of cylinder A is what percentage more/less than the volume of cylinder B?
The curved surface area of cylinder X is 45% of the curved surface area of cylinder Y. If the volume of cylinder X is 27% of the volume of cylinder Y, then the height of cylinder X is what percentage of the height of cylinder Y?
A hollow cylinder is formed by cutting out a solid cylinder of radius r/k from a solid cylinder of radius r. The height of both solid cylinders was equal. The volume of the hollow cylinder m times the volume of the new solid cylinder. What is the relationship between m and k?
Twp cylinders of equal size are filled with equal amount of ideal diatomic gas at room temperature. Both the cylinders are fitted with pistons. In cylinder A the piston is free to move, while in cylinder B the piston is fixed. When same amount of heat is added to cylinder A raises by 20 K. What will be the rise temperature of gas in cylinder B?
The piston rod of a hydraulic cylinder exerts an operating force of 10kN. The allowable stress in the cylinder is 45N/mm². Calculate the thickness of the cylinder using Lame’s equation. Diameter of the cylinder is 40mm and pressure in cylinder is 10MPa.