Bissoy.com
Doctors Medicines MCQs Q&A

For light-work, the rivet size used varies from ______ mm.

For light-work, the rivet size used varies from ______ mm. Correct Answer 3 to 6

The rivet size used generally varies from 3 to 6 mm, for light works. Various types of rivets used for light work applications are based upon the strength of joint, its appearance, its configuration, final riveting approach, etc.

Related Questions

When the axis of load lies in the plane of rivet group, then the most heavily loaded rivet will be the one which (where, Fa is the load shared by each rivet due to axial load and Fm is the shearing load due to moment in any rivet.)
Which of the following assumptions are made in the design of rivet joints? A. Rivets are stressed equally B. Stress in plate is maximum at mid-width C. Rivet hole is completely filled by rivet D. Friction between plates is neglected
Size of rivet hole is _________ size of rivet
According to Indian standards, the diameter of rivet hole is made larger than the basic size of rivet by
The plates to be joined with rivet are drilled with holes of a size slightly less than the shank diameter of the rivet.
If the thickness of plate to be connected by a rivet is 16 mm, then suitable size of rivet as per Unwin’s formula will be
Explosive rivet is another type of ______ rivet.
Which of the following statements are true with regards to the selection of a sample size? (i) The sample size (n) may be a fixed percentage of lot size (N). (ii) The sample size (n) may be kept constant irrespective of lot size (N). (iii) Sample size (n) can be selected at the personal whim of the inspector.
For riveted joint, which empirical relation is used for calculating the diameter of rivet? Where, t = Thickness of main plate, d = Rivet diameter in mm
In order to avoid tearing of the plate at edge, the distance from the center line of the rivet hole to the nearest edge of the plate in terms of dia. of rivet d should be equal to