Bissoy.com
Doctors Medicines MCQs Q&A

Shank diameter of the rivet depends upon the ________

Shank diameter of the rivet depends upon the ________ Correct Answer thickness of the plates to be joined

The shank diameter depends upon the thickness of the plates to be joined. The plates are generally of equal sizes. The two parameters, i.e. diameter and thickness are related by Unwin’s formula.

Related Questions

When the axis of load lies in the plane of rivet group, then the most heavily loaded rivet will be the one which (where, Fa is the load shared by each rivet due to axial load and Fm is the shearing load due to moment in any rivet.)
The plates to be joined with rivet are drilled with holes of a size slightly less than the shank diameter of the rivet.
Two plates each of thickness t are to be riveted together. If length of shank portion necessary to form the closing head is a, then length of rivet shank is given by?
Which of the following assumptions are made in the design of rivet joints? A. Rivets are stressed equally B. Stress in plate is maximum at mid-width C. Rivet hole is completely filled by rivet D. Friction between plates is neglected
The diameter of the rivet hole is usually __________ the nominal diameter of the rivet.
For riveted joint, which empirical relation is used for calculating the diameter of rivet? Where, t = Thickness of main plate, d = Rivet diameter in mm
As per IS: 800-1984 specification, how to calculate the gross diameter of a rivet? (If diameter of the rivet is less than or equal to 25 mm.)
For riveting, the size of hole drilled in plates is __________ shank diameter of rivet.
For a 25 mm hole drilled in plates, the diameter of rivet shank should be
For a 25 mm hole drilled in plates to be rivetted, the shank diameter of the rivet should be __________ mm.