Bissoy.com
Doctors Medicines MCQs Q&A

Two plates each of thickness t are to be riveted together. If length of shank portion necessary to form the closing head is a, then length of rivet shank is given by?

Two plates each of thickness t are to be riveted together. If length of shank portion necessary to form the closing head is a, then length of rivet shank is given by? Correct Answer 2t+a c) t+2a d) Can’t be determined View Answer]

l=t₁+t₂+a.

Related Questions

When the axis of load lies in the plane of rivet group, then the most heavily loaded rivet will be the one which (where, Fa is the load shared by each rivet due to axial load and Fm is the shearing load due to moment in any rivet.)
Consider an enclosure formed by three surfaces having the following values of shape factors, emissivities and temperatures Surface 1 i.e. curved cylindrical has an emissivity 0.75 and temperature 800 K Surface 2 i.e. closing disc has an emissivity 0.8 and temperature 700 K Surface 3 i.e. closing disc has an emissivity 0.8 and temperature 700 K The closing flat discs are 25 mm in diameter and they have interspacing distance equal to 100 mm. If the shape factor between these two identical discs is 0.05, calculate the net rate of radiant heat flow from the curve surface to each of the closing end surface
Two centrifugal pumps P and R are available for use in a pipe flow system and their head-discharge characteristics are as follows. Pump P Pump R Discharge (cumecs) Head (m) Discharge (cumecs) Head (m) 0 40 0 45 0.12 35 0.14 40 0.2 28 0.24 35 0.3 18 0.3 28   The following statements (S1, S2, and S3) pertain to the head and discharge values during actual operation. Neglect losses in the system. Which of the following statements are correct? S1: When the two pumps P and R are connected in parallel, the discharge is 0.36 cumecs corresponding to a head of 35 m. S2: When the two pumps P and R are connected in parallel, the discharge is 0.36 cumecs corresponding to a head of 70 m. S3: When the two pumps P and R are connected in series, the discharge is 0.3 cumecs corresponding to a head of 46 m.
The plates to be joined with rivet are drilled with holes of a size slightly less than the shank diameter of the rivet.
Which of the following assumptions are made in the design of rivet joints? A. Rivets are stressed equally B. Stress in plate is maximum at mid-width C. Rivet hole is completely filled by rivet D. Friction between plates is neglected
For riveted joint, which empirical relation is used for calculating the diameter of rivet? Where, t = Thickness of main plate, d = Rivet diameter in mm
A palindrome is a word that reads the same forwards and backwards. In a game of words, a player has the following two plates painted with letters. From the additional plates given in the options, which one of the combinations of additional plates would allow the player to construct a five-letter palindrome. The player should use all the five plates exactly once. The plates can be rotated in their plane.
In each of the following question below are given some statements followed by some conclusions. Taking the given statements to be true even if they seem to be at variance from commonly known facts, read all the conclusions and then decide which of the given conclusion logically follows the given statements. Statements: I. Some cups are plates. II. All spoons are blue. III. No plates are spoon. Conclusions: I. Some cups are not spoon. II. Some plates are not blue. III. Some cups are not blue. IV. Some blue are not plates.
In each of the following question below are given some statements followed by some conclusions. Taking the given statements to be true even if theyseem to be at variance from commonly known facts, read all the conclusions and then decide which of the given conclusion logically follows the given statements.
Statements:
I. Some cups are plates.
II. All spoons are blue.
III. No plates are spoon.
Conclusions:
I. Some cups are not spoon.
II. Some plates are not blue.
III. Some cups are not blue.
IV. Some blue are not plates.
Thickness of 8 tyres L, M, N, O, P, Q, R and S is compared. Thickness of no two tyres is same. Thickness of N is more than L but less than 6 tyres. Thickness of O is more than M but less than Q. Thickness of P is less than only two tyres. Thickness of Q is not more than P. Which of the following statement is not correct?