Bissoy.com
Doctors Medicines MCQs Q&A

Find the length of stroke if the length of the slotted bar is 0.45m and LOS passes through the free end of the lever. Length of driving crank = 0.12m, distance between fixe centres = 0.24m. Crank and slotted lever quick return motion mechanism.

Find the length of stroke if the length of the slotted bar is 0.45m and LOS passes through the free end of the lever. Length of driving crank = 0.12m, distance between fixe centres = 0.24m. Crank and slotted lever quick return motion mechanism. Correct Answer 450mm

We know that length of stroke is: 2x450xsin(90-α/2) α=120 degrees, therefore length = 450mm.

Related Questions

In a crank and slotted lever quick return mechanism, the distance between the fixed centres is 400 mm and the length of the crank is 250 mm. If the length of the slotted bar is 2000 mm, find the length of the stroke if the line of stroke passes through the extreme positions of the free side of the lever.
A crank and slotted lever quick return mechanism has a centre distance of 1000 mm between the centre of oscillation of slotted lever and centre of rotation of the crank. Radius of the crank is 420 mm. Find the ratio of time of cutting stroke to time of return stroke.
Find the inclination of the slotted bar with the vertical in degrees in the extreme position from the following information: In a crank and slotted lever quick return motion mechanism, the distance between the fixed centres is 0.240 m and the length of the driving crank is 0.120 m.
Find the ratio of the time of cutting to the time of return stroke from the following information: In a crank and slotted lever quick return motion mechanism, the distance between the fixed centres is 0.240 m and the length of the driving crank is 0.120 m.
In a Whitworth quick return mechanism, distance between the fixed centres is 30mm and the length of the driving crank is 60 mm. The length of the slotted lever is 100 mm and the length of the connecting rod is 85 mm. Find the ratio of time of cutting stroke to time of return stroke.
A crank and slotted lever mechanism used in a shaper has a centre distance of 300 mm between the centre of oscillation of the slotted lever and the centre of rotation of the crank. The radius of the crank is 120 mm. Find the ratio of the time of cutting to the time of return stroke.
Find the ratio of the time of cutting to the time of return stroke from the following information: A crank and slotted lever mechanism used in a shaper has a centre distance of 0.300 m between the centre of oscillation of the slotted lever and the centre of rotation of the crank. The radius of the crank is 0.120 m.
In a crank and slotted lever quick-return motion, the distance between the fixed centres is 150 mm and the length of the driving crank is 75mm. the ratio of the time taken on the cutting and return strokes is
Match the following Types of mechanism Motion achieved P. Scott Russel mechanism 1. Intermittent motion Q. Geneva mechanism 2. Quick return motion R. Off set slider crank mechanism 3. Simple harmonic motion S. scotch Yoke mechanism 4. Straight line motion
For a crank and slotted lever quick return mechanism,β = 260°. Find the ratio of time of cutting stroke to time of quick return stroke.