Bissoy.com
Doctors Medicines MCQs Q&A

Find the ratio of the time of cutting to the time of return stroke from the following information: A crank and slotted lever mechanism used in a shaper has a centre distance of 0.300 m between the centre of oscillation of the slotted lever and the centre of rotation of the crank. The radius of the crank is 0.120 m.

Find the ratio of the time of cutting to the time of return stroke from the following information: A crank and slotted lever mechanism used in a shaper has a centre distance of 0.300 m between the centre of oscillation of the slotted lever and the centre of rotation of the crank. The radius of the crank is 0.120 m. Correct Answer 1.72

We know that time of cutting stroke to the time of return stroke is given by 360-α/ α Using trigonometric ratios we find that α =132.8° therefore, Ratio = 1.72.

Related Questions

A crank and slotted lever quick return mechanism has a centre distance of 1000 mm between the centre of oscillation of slotted lever and centre of rotation of the crank. Radius of the crank is 420 mm. Find the ratio of time of cutting stroke to time of return stroke.
A crank and slotted lever mechanism used in a shaper has a centre distance of 300 mm between the centre of oscillation of the slotted lever and the centre of rotation of the crank. The radius of the crank is 120 mm. Find the ratio of the time of cutting to the time of return stroke.
In a crank and slotted lever quick return mechanism, the distance between the fixed centres is 400 mm and the length of the crank is 250 mm. If the length of the slotted bar is 2000 mm, find the length of the stroke if the line of stroke passes through the extreme positions of the free side of the lever.
Find the ratio of the time of cutting to the time of return stroke from the following information: In a crank and slotted lever quick return motion mechanism, the distance between the fixed centres is 0.240 m and the length of the driving crank is 0.120 m.
Find the length of stroke if the length of the slotted bar is 0.45m and LOS passes through the free end of the lever. Length of driving crank = 0.12m, distance between fixe centres = 0.24m. Crank and slotted lever quick return motion mechanism.
In a Whitworth quick return mechanism, distance between the fixed centres is 30mm and the length of the driving crank is 60 mm. The length of the slotted lever is 100 mm and the length of the connecting rod is 85 mm. Find the ratio of time of cutting stroke to time of return stroke.
For a crank and slotted lever quick return mechanism, α = 150°. Find the ratio of time of cutting stroke to time of return stroke.
For a crank and slotted lever quick return mechanism,β = 260°. Find the ratio of time of cutting stroke to time of quick return stroke.
In a crank and slotted lever mechanism, length of fixed link and crank is 250 mm and 100 mm respectively. Ratio of cutting stroke time to return stroke time will be
Find the inclination of the slotted bar with the vertical in degrees in the extreme position from the following information: In a crank and slotted lever quick return motion mechanism, the distance between the fixed centres is 0.240 m and the length of the driving crank is 0.120 m.